New Updated Microsoft MCITP 70-649 Real Exam Questions and Answers Download 91-100

Ensurepass

QUESTION 91

Your company has a server named DC1 that runs Windows Server 2008 R2. Server1 has the DHCP Server role installed. You find that a desktop computer named Computer1 is unable to obtain an IP configuration from the DHCP server. You install the Microsoft Network Monitor 3.0 application on Server1. You enable P-mode in the Network Monitor application configuration. You plan to capture only the DHCP server-related traffic between Server1 and Computer1. The network interface configuration for the two computers is shown in the following table.

 

70-649-demo-10

 

You need to build a filter in the Network Monitor application to capture the DHCP traffic between Server1 and Computer1. Which filter should you use?

 

  1. IPv4.Address == 169.254.15.84 && DHCP

  2. IPv4.Address == 192.168.2.1 && DHCP

  3. Ethernet.Address == 0x000A5ElC7F67 && DHCP

  4. Ethernet.Address == 0x001731D55EFF &&. DHCP

 

Correct Answer: D

 

 

 

 

QUESTION 92

You create a Data Collector Set (DCS). You need prevent the DCS from logging data if the server has less than 1 GB of available disk space. What should you do?

 

  1. Modify the Stop Conditions settings of the DCS.

  2. Create a passive file screen.

  3. Create an active file screen.

  4. Modify the Data Manager settings of the DCS.

 

Correct Answer: D

 

 

QUESTION 93

Your network contains a Windows Server Update Services (WSUS) server named Server1. Server1 provides updates to client computers in two sites named Site1 and Site2. A WSUS computer group named Group1 is configured for automatic approval. You need to ensure that new client computers in Site2 are automatically added to Group1. Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

 

  1. Configure a Group Policy object (GPO) that enables client-side targeting.

  2. Modify the Computers Options in the Update Services console.

  3. Create a new automatic approval update rule.

  4. Modify the Automatic Approvals options in the Update Services console.

 

Correct Answer: AB

 

 

QUESTION 94

Your network contains a server that runs Windows Server 2008 R2 Standard. The server is configured to native boot from a virtual hard disk (VHD). All hard disks on the server are configured as basic disks that use an MBR. A new corporate security policy states that all of the hard disks on the server must use Windows BitLocker Drive Encryption (BitLocker). You need to ensure that the server meets the corporate security policy. What should you do first?

 

  1. Convert the disks to dynamic disks.

  2. Upgrade the server to Windows Server 2008 R2 Enterprise.

  3. Back up the server and restore the server to a physical volume.

  4. Configure the disks to use a GPT.

 

Correct Answer: C

 

 

 

 

QUESTION 95

Your network contains a Windows Server 2003 server cluster named Cluster1. Cluster1 hosts a print server instance named Print1. You deploy a Windows Server 2008 R2 failover cluster named Cluster2. You configure Cluster2 to use the physical disk resource used by Print1. From Cluster2, you run the Migrate a Cluster Wizard to migrate Print1 to Cluster2. You need to ensure that Print1 runs on Cluster2. What should you do first?

 

  1. On Cluster2, modify the failover settings of Print1.

  2. On Cluster1, take Print1 offline.

  3. On Cluster1, modify the failover settings of Print1.

  4. On Cluster2, modify the preferred owner settings of Print1.

 

Correct Answer: B

 

 

QUESTION 96

Your network contains an Active Directory domain named adatum.com. You publish a RemoteApp named Webapp1. The Remote Desktop Connection (.rdp) file for Webapp1 is unsigned. When a user named User1 runs Webapp1 from the Remote Desktop Web access (RD web Access) website, User1 is prompted for credentials. You need to prevent users from being prompted for credentials when they run Webapp1. What should you do?

 

  1. Enable the Allow Delegating Default Credentials Group Policy setting.

  2. Configure the SSL Settings for the RDWeb virtual directory.

  3. Enable the Assign a default domain for logon Group Policy setting.

  4. Modify the Authentication Settings for the RDWeb virtual directory.

 

Correct Answer: A

 

 

QUESTION 97

Your company has an Active Directory domain. The company has a server named Server1 that has the Remote Desktop Services server role and the RD Web Access role service installed. The company has a server named Server2 that runs ISA Server 2006. The company deploys the Remote Desktop Gateway (RD Gateway) role on a new server named Server3. The company wants to use ISA as the SSL endpoint for Remote Desktop connections. You need to configure the RD Gateway role on Server3 to use ISA 2006 on Server2. What should you do?

 

  1. Configure the RD Gateway to use SSL HTTPS-HTTP bridging.

  2. Export a self-signed SSL certificate from Server3 and install the SSL certificate on Server2. Configure the ISA service on Server2 to use the SSL certificate from Server3.

  3. Configure the Remote Desktop Connection Authorization Policy Store on Server3 to use Server2 as the Central Network Policy Server.

  4. Export the SSL certificate from Server2 and install the SSL certificate on Server3. Configure the RD Gateway to use the SSL certificate from Server2.

 

Correct Answer: A

 

 

QUESTION 98

Your network contains three servers that run Windows Server 2008 R2. The servers are configured as shown in the following table.

 

70-649-demo-11

 

On Server1, you configure a virtual desktop pool named Pool1. Pool1 contains a Windows 7 virtual machine (VM) named Computer1. You need to ensure that when a user logs off of Computer1, all of the changes made to Computer1 are discarded. What should you do?

 

  1. From the properties of Pool1 on Server1, modify the Automatically save virtual machines setting.

  2. From the Remote Desktop Session Host Configuration console on Server1, modify the Delete temporary folders on exit setting.

  3. On Server2, enable shadow copies.

  4. On Server2, take a snapshot of Computer1 and rename the snapshot RDV_Rollback.

 

Correct Answer: D

 

 

QUESTION 99

Your network contains a single Active Directory domain. The domain contains two servers. The servers are configured as shown in the following table.

 

70-649-demo-12

 

You install 100 Remote Desktop Services Per User client access licenses (RDS Per User CALs) on Server1. You discover that when users connect to Remote Desktop Services (RDS) on Server2, they receive temporary licenses. You need to ensure that users receive permanent licenses when they connect to Server2. What should you do?

 

  1. On Server2, change the Remote Desktop licensing mode to Per User.

  2. On Server1, change the discovery scope of the license server to Domain.

  3. On Server2, install the RD Licensing role service.

  4. On Server1, remove the RD Session Host role service.

 

Correct Answer: A

 

 

QUESTION 100

Your company has an Active Directory domain. The company runs Remote Desktop services. Standard Users who connect to the Remote Desktop Sessions Host Server are in an organizational unit (OU) named OU1. Administrative users are in OU1. No other users connect to the Remote Desktop Session Host Server. You need to ensure that only members of OU1 can run Remote Desktop Protocol files. What should you do?

 

  1. Create a Group Policy object (GPO) that configures the Allow .rdp files from valid publishers and user’s default .rdp settings policy setting in the Remote Desktop Client Connection template to Enabled. Apply the GPO to OU1.

  2. Create a Group Policy object (GPO) that configures the Specify SHA1 thumbprints of certificates representing trusted .rdp publishers’ policy setting in the Remote Desktop Client Connection template to Enabled. Apply the GPO to OU1.

  3. Create a Group Policy object (GPO) that configures the Allow .rdp files from unknown publishers’ policy setting in the Remote Desktop Client Connection template to Disabled. Apply the GPO to OU1.

  4. Create a Group Policy object (GPO) that configures the Allow .rdp files from valid publishers and user’s default .rdp settings policy setting in the Remote Desktop Client Connection template to Disabled. Apply the GPO to OU1.

 

Correct Answer: B

 

Instant Access to Download Latest Complete Collection of Microsoft MCITP 70-649 Real Exam

Try Microsoft MCITP 70-649 Free Demo