Latest MCSA 70-642 Real Exam Download 261-270

Ensurepass

QUESTION 261

Your network contains two servers named Server1 and Server2 that run a Server Core installation of Windows Server 2008 R2. Server1 has the SNMP Service installed. You need to ensure that Server2 can send SNMP traps to Server1. What should you do?

 

A.      On Server2, run dism /online /enable-feature /featurename:snmp-sc.

B.      On Server1, run oclistsnmp-sc.

C.      On Server2, run oclistsnmp-sc.

D.      On Server1, run dism /online /enable-feature /featurename:snmp-sc.

 

Correct Answer: A

 

 

QUESTION 262

Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 contains two shared folders named Share1 and Share2. The shared folders are located on the same volume. You need to prevent users from storing more than 100 MB of data in Share1 only. What should you install on Server1?

 

A.       File Server Resource Manager (FSRM)

B.       Network Policy Server (NPS)

C.       Services for Network File System (NFS)

D.       Windows System Resource  Manager (WSRM)

Correct Answer: A

 

 

QUESTION 263

Your network contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2008 R2. The servers have the Network Policy Server (NPS) role service installed. You configure a Remote RADIUS Server Group named Group1. Group 1 contains Server2, Server3, and Server4. You need to configure load balancing for the members of Group1 to meet the following requirements:

 

Ÿ   Server1 must send 25 percent of all authentication requests to Server3.

Ÿ   Server1 must send 75 percent of all authentication requests to Server2.

Ÿ   Server1 must only send authentication requests to Server4 if Server2 and Server3 are unavailable.

 

What should you do from the Network Policy Server console?

 

A.      For Server2, set the weight to 75 and the priority to 75,

For Server3, set the weight to 25 and the priority to 25.

For Server4, set the weight to 100 and the priority to 200.

 

B.      For Server2, set the weight to 75 and the priority to 1.

For Server3, set the weight to 25 and the priority to 1.

For Server4, set the weight to 100 and the priority to 100.

 

C.      For Server2, set the weight to 1 and the priority to 75.

For Server3, set the weight to 1 and the priority to 25.

For Server4, set the weight to 100 and the priority to 1.

 

D.      For Server2, set the weight to 75 and the priority to 25.

For Server3, set the weight to 25 and the priority to 75.

For Server4, set the weight to 100 and the priority to 1.

 

Correct Answer: B

 

 

QUESTION 264

You are planning the network for a branch office. The branch office will contain 100 IPv4 hosts. You need to recommend a subnet mask for the branch office. The subnet mask must minimize the number of unused IP addresses. Which subnet mask should you use?

 

A.       255.255.255.0

B.       255.255.255.128

C.       255.255.0.0

D.       255.255.128.0

 

Correct Answer: B

 

 

QUESTION 265

Your network contains an Active Directory forest. The forest contains a member server named VPN1 that runs Windows Server 2008 R2. You configure VPN1 as a VPN server. You need to ensure that only client computers that have windows Update enabled can establish VPN connections to VPN1. What should you install on VPN1?

 

A.      Windows Server Update Services (WSUS)

B.      Network Policy Server (NPS)

C.      Health Registration Authority (HRA)

D.      Connection Manager Administration Kit (CMAK)

 

Correct Answer: B

 

 

QUESTION 266

Your network contains a server that runs Windows Server 2008 R2. On the server, you run ipconfig as shown in the exhibit.

 

clip_image002

 

You need to ensure that the server can access remote TCP/IPv6 hosts. What should you do?

 

A.      Disable Internet Protocol Version 4 (TCP/IPv4).

B.      Add a default gateway.

C.      Modify the subnet mask.

D.      Configure an IPv6 address.

 

Correct Answer: D

 

 

QUESTION 267

Your network contains a server named Server1 that has the Routing and Remote Access service (RRAS) role service installed. Server1 provides access to the internal network by using Point-to-Point Tunneling Protocol (PPTP). Static RRAS filters on the external interface of Server1 allow only PPTP. The IP address of the external interface is 131.107.1.100. You install the Web Server (IIS) role on Server1. You need to ensure that users on the Internet can access a Web site on Server1 by using HTTP. The solution must minimize the number of open ports on Server1. Which two static RRAS filters should you configure on Server1? (Each correct answer presents part of the solution. Choose two.)

 

A.      An outbound filter that has the following configurations:

Source network: 131.107.1.100/32

Destination network: Any

Protocol: TCP (established)

Port: 80

 

B.      An outbound filter that has the following configurations:

Source network: 131.107.1.100/32

Destination network: Any

Port: 80

 

C.      An outbound filter that has the following configurations:

Source network: 131.107.1.100/32

Destination network: Any

Protocol: TCP

Port: Any

 

D.      An inbound filter that has the following configurations:

Source network: Any

Destination network: 131.107.1.100/32

Protocol: TCP

Port: 80

 

E.       An inbound filter that has the following configurations:

Source network: 131.107.1.100/32

Destination network: Any

Protocol: TCP

Port: Any

 

Correct Answer: AD

 

 

QUESTION 268

Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Network Access Protection (NAP) is deployed on Server1. Server2 has the Routing and Remote Access service (RRAS) role service installed. You need to configure Server2 to use NAP VPN enforcement. Which authentication method should you enable on Server2?

 

A.      Microsoft encrypted authentication version 2 (MS-CHAP v2)

B.      Extensible authentication protocol (EAP)

C.      Allow machine certificate authentication for IKEv2

D.      Encrypted authentication (CHAP)

 

Correct Answer: B

 

 

QUESTION 269

Your network contains a server that runs a Server Core installation of Windows Server 2008 R2. You need to log the CPU utilization of the server. Which tool should you use?

 

A.      relog.exe

B.      oclist.exe

C.      logman.exe

D.      sc.exe

 

Correct Answer: C

 

 

QUESTION 270

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that has the Print and Document Services server role installed. Server1 contains 200 shared printers. Currently, none of the shared printers are listed in Active Directory. You need to ensure that all of the shared printers on Server1 can be located by searching Active Directory. Which tool should you use? (Each correct answer presents a complete solution. Choose two)

 

A.      Setprinter.exe

B.      Printui.exe

C.      Prnmngr.vbs

D.      Print management

E.       Pubprn.vbs

 

Correct Answer: DE

 

Download Latest 70-642 Real Free Tests , help you to pass exam 100%.