[Free] Get all latest Microsoft 70-412 Actual Tests 241-250
QUESTION 241
Your network contains an Active Directory domain named adatum.com. The domain contains a
file server named FS1 that runs Windows Server 2012 R2 and has the File Server Resource
Manager role service installed. All client computers run Windows 8. File classification and
Access-Denied Assistance are enabled on FS1. You need to ensure that if users receive an Access
Denied message, they can request assistance by email from the Access Denied dialog box. What
should you configure?
A. A file management task.
B. A classification property.
C. The File Server Resource Manager Options.
D. A report task.
Correct Answer: C
QUESTION 242
You have a server named LON-DC1 that runs Windows Server 2012 R2. An iSCSI virtual disk named VirtuahSCSIl.vhd exists on LON-DC1 as shown in the exhibit.
You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.
VirtuahSCSI1.vhd is removed from LON-DC1. You need to assign VirtualiSCSI2.vhd a logical unit
value of 0. What should you do?
A. Run the Set-IscsiVirtualDisk cmdlet and specify the -DevicePath parameter.
B. Run the iscsicpl command and specify the virtualdisklun parameter.
C. Modify the properties of the itgt ISCSI target.
D. Run the Set-VirtualDisk cmdlet and specify the -Uniqueld parameter.
Correct Answer: D
QUESTION 243
Your network contains three servers named Server1, Server2, and Server3. All servers run
Windows Server 2012 R2. You need to ensure that Server1 can provide iSCSI storage for Server2
and Server3. What should you do on Server1?
A. Start the Microsoft iSCSI Initiator Service and configure the iSCSI Initiator Properties.
B. Install the iSNS Server service feature and create a Discovery Domain.
C. Install the Multipath I/O (MPIO) feature and configure the MPIO Properties.
D. Install the iSCSI Target Server role service and configure iSCSI targets.
Correct Answer: D
QUESTION 244
Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 and Server2 are nodes in a failover cluster named Cluster1. The network contains two
servers named Server3 and Server4 that run Windows Server 2012 R2. Server3 and Server4 are
nodes in a failover cluster named Cluster2. You need to move all of the App1ications and the
services from Cluster1 to Cluster2. What should you do first from Failover Cluster Manager?
A. On a server in Cluster2, configure Cluster-Aware Updating.
B. On a server in Cluster2, click Move Core Cluster Resources, and then click Best Possible Node.
C. On a server in Cluster1, click Move Core Cluster Resources, and then click Best Possible Node.
D. On a server in Cluster1, click Migrate Roles.
Correct Answer: B
QUESTION 245
You have a server named LON-DC1 that runs Windows Server 2012 R2. An iSCSI virtual disk
named VirtualiSCSI1.vhd exists on LON-DC1 as shown in the exhibit.
You create a new iSCSI virtual disk named VirtualiSCSI2.vhd by using the existing itgt iSCSI target.
VirtualiSCSIl.vhd is removed from LON-DC1. You need to assign VirtualiSCSI2.vhd a logical unit
value of 0. What should you do?
A. Modify the properties of the itgt ISCSI target.
B. Modify the properties of the VirtualiSCSI2.vhd iSCSI virtual disk.
C. Run the Set-VirtualDisk cmdlet and specify the -Uniqueld parameter.
D. Run the iscsicli command and specify the reportluns parameter.
Correct Answer: B
QUESTION 246
You have a Hyper-V host named Server1 that runs Windows Server 2012 R2. Server1 contains a
virtual machine named VM1 that runs Windows Server 2012 R2. You fail to start VM1 and you
suspect that the boot files on VM1 are corrupt. On Server1, you attach the virtual hard disk (VHD)
of VM1 and you assign the VHD a drive letter of F. You need to repair the corrupt boot files on
VM1. What should you run?
A. bootrec.exe /rebuildbcd
B. bootrec.exe /scanos
C. bcdboot.exe f:windows /s c:
D. bcdboot.exe c:windows /s f:
Correct Answer: D
QUESTION 247
Your network contains an Active Directory domain named contoso.com. The domain contains a
server named Server1 that runs Windows Server 2012 R2 and has the DNS Server server role
installed. Server1 has a zone named contoso.com. The zone is configured as shown in the exhibit.
You need to assign a user named User1 permission to add and delete records from the
contoso.com zone only. What should you do first?
A. Enable the Advanced view from DNS Manager.
B. Add User1 to the DnsUpdateProxy group.
C. Run the New Delegation Wizard.
D. Configure the zone to be Active Directory-integrated.
Correct Answer: D
QUESTION 248
Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. Server1 and Server2 are nodes in a failover cluster named Cluster1. The network contains two
servers named Server3 and Server4 that run Windows Server 2012 R2. Server3 and Server4 are
nodes in a failover cluster named Cluster2. You need to move all of the App1ications and the
services from Cluster1 to Cluster2. What should you do first from Failover Cluster Manager?
A. On a server in Cluster1, click Move Core Cluster Resources, and then click Select Node.
B. On a server in Cluster2, configure Cluster-Aware Updating.
C. On a server in Cluster1, configure Cluster-Aware Updating.
D. On a server in Cluster2, click Migrate Roles.
E. On a server in Cluster2, click Move Core Cluster Resources, and then click Best Possible Node.
Correct Answer: E
QUESTION 249
Your network contains two servers named HV1 and HV2. Both servers run Windows Server 2012
R2 and have the Hyper-V server role installed. HV1 hosts 25 virtual machines. The virtual machine
configuration files and the virtual hard disks are stored in D:VM. You shut down all of the virtual
machines on HV1. You copy D:VM to D:VM on HV2. You need to start all of the virtual machines
on HV2. You want to achieve this goal by using the minimum amount of administrative effort.
What should you do?
A. Run the Import-VMInitialReplication cmdlet.
B. From HV1, export all virtual machines to D:VM. Copy D:VM to D:VM on HV2 and overwrite
the existing files. On HV2, run the Import Virtual Machine wizard.
C. From HV1, export all virtual machines to D:VM. Copy D:VM to D:VM on HV2 and overwrite
the existing files. On HV2, run the New Virtual Machine wizard.
D. Run the Import-VM cmdlet.
Correct Answer: D
QUESTION 250
Your company recently deployed a new Active Directory forest named contoso.com. The first
domain controller in the forest runs Windows Server 2012 R2. You need to identify the
time-to-live (TTL) value for domain referrals to the NETLOGON and SYSVOL shared folders.
Which tool should you use?
A. Ultrasound
B. Replmon
C. Dfsdiag
D. Frsutil
Correct Answer: C
Instant Access to Download Testing Software & PDF File for Microsoft 70-412 Real Exam
Instant Access to Try Microsoft 70-412 Free Demo
70-410 Dumps VCE PDF
70-411 Dumps VCE PDF
70-412 Dumps VCE PDF
70-413 Dumps VCE PDF
70-414 Dumps VCE PDF
70-417 Dumps VCE PDF
70-461 Dumps VCE PDF
70-462 Dumps VCE PDF
70-463 Dumps VCE PDF
70-464 Dumps VCE PDF
70-465 Dumps VCE PDF
70-480 Dumps VCE PDF
70-483 Dumps VCE PDF
70-486 Dumps VCE PDF
70-487 Dumps VCE PDF