[Free] Download New Latest (November) Microsoft 70-417 Actual Tests 61-70

Ensurepass

QUESTION 61

Your company deploys a new Active Directory forest named contoso.com. The first domain controller in the forest runs Windows Server 2012 R2. The forest contains a domain controller named DC10.

 

On DC10, the disk that contains the SYSVOL folder fails.

 

You replace the failed disk. You stop the Distributed File System (DFS) Replication service.

 

You restore the SYSVOL folder.

 

You need to perform a non-authoritative synchronization of SYSVOL on DC10.

 

Which tool should you use before you start the DFS Replication service on DC10?

 

A.

Active Directory Sites and Services

B.

Ultrasound

C.

Adsiedit.msc

D.

Frsutil

 

Correct Answer: C

Explanation:

How to perform a non-authoritative synchronization of DFSR-replicated SYSVOL (like “D2” for FRS)

1. In theADSIEDIT.MSC tool modify the following distinguished name (DN) value and attribute on each of the domain controllers that you want to make non- authoritative:CN=SYSVOL Subscription,CN=Domain System Volume,CN=DFSR- LocalSettings,CN=<the server name>,OU=Domain Controllers,DC=<domain>msDFSR- Enabled=FALSE

2. Force Active Directory replication throughout the domain.

Etc

 

 

QUESTION 62

Your network contains an Active Directory domain named adatum.com. The domain contains the servers shown in the following table.

 

clip_image002

 

You need to ensure that you can use Server Manager on DC1 to manage DC2.

 

Which two tasks should you perform? (Each correct answer presents part of the solution. Choose two.)

A.

Install the Windows PowerShell 2.0 engine on DC1.

B.

Install Microsoft .NET Framework 4 on DC2.

C.

Install Windows Management Framework 3.0 on DC2.

D.

Install Remote Server Administration Tools on DC1.

E.

Install Remote Server Administration Tools on DC2.

 

Correct Answer: BC

Explanation:

In Windows Server 2012, you can use Server Manager to perform management tasks on remote servers. Remote management is enabled by default on servers that are running Windows Server 2012. To manage a server remotely by using Server Manager, you add the server to the Server Manager server pool.

You can use Server Manager to manage remote servers that are running Windows Server 2008 and Windows Server 2008 R2, but the following updates are required to fully manage these older operating systems.

Windows Management Framework 3.0 To use this release of Server Manager to access and manage remote servers that are running Windows Server 2008 or Windows Server 2008 R2, you must first install .NET Framework 4.0, and then install Windows Management Framework 3.0 on those servers.

 

Reference:

Training Guide: Installing and Configuring Windows Server 2012, Chapter 2: Deploying servers, p. 80

 

 

QUESTION 63

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Network Policy Server role service installed.

 

You plan to configure Server1 as a Network Access Protection (NAP) health policy server for VPN enforcement by using the Configure NAPwizard.

 

You need to ensure that you can configure the VPN enforcement method on Server1 successfully.

 

What should you install on Server1 before you run the Configure NAP wizard?

 

A.

A computer certificate

B.

A system health validator (SHV)

C.

The Remote Access server role

D.

The Host Credential Authorization Protocol (HCAP)

 

Correct Answer: A

Explanation:

http://technet.microsoft.com/en-us/library/cc732681.aspx

http://technet.microsoft.com/en-us/library/dd125396(v=ws.10).aspx

http://technet.microsoft.com/en-us/library/hh831416.aspx

http://technet.microsoft.com/en-us/library/dd125301(v=ws.10).aspx

 

 

 

 

 

QUESTION 64

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2 that run Windows Server 2012 R2.

 

You log on to Server1.

 

You need to retrieve the IP configurations of Server2.

 

Which command should you run from Server1?

 

A.

winrm get server2

B.

dsquery ?-scope base -attrip/server2

C.

winrs -r:server2ipconfig

D.

ipconfig> server2.ip

 

Correct Answer: C

Explanation:

Windows Remote Management allows you to manage and execute programs remotely

References:

Exam Ref 70-410: Installing and Configuring Windows Server 2012: Objective 4.3: Deploy and Configure the DNS service, Chapter 4 Deploying and Configuring core network services, p. 246

http://technet.microsoft.com/en-us/library/dd349801(v=ws.10).aspx

 

 

QUESTION 65

Your network contains an Active Directory domain named adatum.com.

 

You have a standard primary zone named adatum.com.

 

You need to provide a user named User1 the ability to modify records in the zone.

 

Other users must be prevented from modifying records in the zone.

 

What should you do first?

 

A.

Run the Zone Signing Wizard for the zone

B.

From the properties of the zone, change the zone type

C.

Run the new Delegation Wizard for the zone

D.

From the properties of the zone, modify the Start Of Authority (SOA) record

 

Correct Answer: C

 

 

QUESTION 66

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1. The domain contains a standalone server named Server2 that is located in a perimeter network. Both servers run the default installation of Windows Server 2012 R2.

 

You need to manage Server2 remotely from Server1.

 

What should you do?

 

A.

From Server1, run the Enable-PsRemotingcmdlet.

B.

From Server2, run the winrm command.

C.

From Server2, run the Enable-PsRemotingcmdlet.

D.

From Server1, run the winrm command.

 

Correct Answer: D

 

 

QUESTION 67

DRAG DROP

Your network contains an Active Directory domain named contoso.com. The domain contains a file server named File1. All servers in the domain run Windows Server 2012 R2.

 

You need to create a new volume on File1.

 

The new volume must have the following configurations:

 

clip_image004Have the drive letter T

clip_image004[1]Have the FAT32 file system

clip_image004[2]Be stored on a new virtual hard disk

 

In which order should you run the Diskpart commands?

 

To answer, move all the Diskpart commands from the list of commands to the answer area and arrange them in the correct order.

 

clip_image006

 

Correct Answer:

clip_image008

 

 

QUESTION 68

Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.

 

Server1 and Server2 have the Network Load Balancing (NLB) feature installed. The servers are configured as nodes in an NLB cluster named Cluster1. Cluster1 hosts a secure web Application named WebApp1. WebApp1 saves user state information locally on each node.

 

You need to ensure that when users connect to WebApp1, their session state is maintained.

 

What should you configure?

 

A.

Affinity None

B.

Affinity Single

C.

The cluster quorum settings

D.

The failover settings

E.

A file server for general use

F.

The Handling priority

G.

The host priority

H.

Live migration

I.

The possible owner

J.

The preferred owner

K.

Quick migration

L.

The Scale-Out File Server

 

Correct Answer: B

Explanation:

Even though Network Load Balancing (NLB) hasn’t changed significantly since Windows Server 2008 and isn’t mentioned in this chapter, be sure to review the feature and its configurable options. For example, remember that in port rules for Network Load Balancing clusters, the Affinity setting determines how you want multiple connections from the same client handled by the NLB cluster. “Affinity: Single” redirects clients back to the same cluster host. “Affinity: Network” redirects clients from the local subnet to the cluster host. “Affinity: None” doesn’t redirect multiple connections from the same client back to the same cluster host.

 

http://technet.microsoft.com/en-us/library/bb687542.aspx

 

Using NLB

Client Affinity

NLB offers three types of client affinity to minimize response time to clients and provide generic support for preserving session state. Each affinity specifies a different method for distributing client requests. In Application Center, the New Cluster Wizard sets affinity to Single by default. Later, you can use the cluster Properties dialog box to modify the affinity. The following table describes the three types of affinity.

 

clip_image010

 

No Affinity

With No affinity, NLB does not associate clients with a particular member. Every client request can be load balanced to any member. This affinity provides the best performance but might disrupt clients with established sessions, because subsequent requests might be load balanced to other members where the session information does not exist. Single Affinity In Single affinity, NLB associates clients with particular members by using the client’s IP address. Thus, requests coming from the same client IP address always reach the same member. This affinity provides the best support for clients that use sessions on an intranet. These clients cannot use No affinity because their sessions could be disrupted. Additionally, these clients cannot use Class C affinity because intranet clients typically have IP addresses within a narrow range. It is likely that this range is so narrow that all clients on an intranet have the same Class C address, which means that one member might process all of the requests while other members remain idle. Class C Affinity With Class C affinity, NLB associates clients with particular members by using the Class C portion of the client’s IP address. Thus, clients coming from the same Class C address range always access the same member. This affinity provides the best performance for clusters serving the Internet. Bb687542.note(en- us,TechNet.10).gif Note It is not efficient for Internet clients to use Single affinity because, in Single affinity, NLB load balances each client by the client’s entire IP address, which can span a broad range. By using Class C affinity, NLB associates clients with only the same Class C portion of the IP address with particular members. Therefore, you essentially reduce the range of IP addresses by which NLB load balances clients.

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 69

You have a server named FS1 that runs Windows Server 2012 R2.

 

You install the File and Storage Services server role on FS1.

 

From Windows Explorer, you view the properties of a shared folder named Share1 and you discover that the Classification tab is missing.

 

You need to ensure that you can assign classifications to Share1 from Windows Explorer manually.

 

What should you do?

 

A.

Install the Enhanced Storage feature.

B.

From Folder Options, clear Use Sharing Wizard (Recommend).

C.

Install the File Server Resource Manager role service.

D.

From Folder Options, select Show hidden files, folders, and drives.

 

Correct Answer: C

 

 

QUESTION 70

Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server 1. Server1 runs Windows Server 2012 R2.

 

You need to create a 3-TB virtual hard disk (VHD) on Server1.

 

Which tool should you use?

 

A.

New-StoragePool

B.

Diskpart

C.

File Server Resource Manager (FSRM)

D.

New-StorageSubsytemVirtualDisk

 

Correct Answer: B

Explanation:

You can create a VHD from either the Disk Management snap-in or the command line (diskpart).

From the DiskPart command-line tool at an elevated command prompt, run the create vdisk command and specify the file (to name the file) and maximum (to set the maximum size in megabytes) parameters. The following code demonstrates how to create a VHD file at C:vdisksdisk1.vdh with a maximum file size of 16 GB (or 16,000 MB).

DiskPart

Microsoft DiskPart version 6.1.7100

Copyright (C) 1999-2008 Microsoft Corporation.

On computer: WIN7

DISKPART> create vdisk file=”C:vdisksdisk1.vhd” maximum=16000

 

Free VCE & PDF File for Microsoft 70-417 Actual Tests

Instant Access to Free VCE Files: MCSE|MCSA|MCITP…
Instant Access to Free PDF Files: MCSE|MCSA|MCITP…