[Free] 2019(Nov) EnsurePass Juniper JN0-102 Dumps with VCE and PDF 301-310

Get Full Version of the Exam
http://www.EnsurePass.com/JN0-102.html

Question No.301

Exhibit

user@routergt; show route

inet.0: 9 destinations, 9 routes (9 active, 0 holddown, 0 hidden)

= Active Route, – = Last Active, * = Both 10.10.10.91/32 *[Direct/0] 00:09:40

gt;via lo0.0

10.10.10.92/32 *[OSPF/10] 00:01:50, metric 1

gt;to 172.16.1.2 via ge-0/0/2.0 100.100.1.0/24 *[Static/5] 00:01:50

Reject

172.16.1.0/24 *[Direct/0] 00:06:09

gt;via ge-0/0/2.0

172.16.1.1/32 *[Local/0] 00:06:09

Local via ge-0/0/2.0

192.168.0.0/16 *[Aggregate/130] 00:00:06

Reject

192.168.0.0/17 *[Aggregate/130] 00:00:06

gt;to 172.16.1.2 via ge-0/0/2.0 192.168.50.0/24 *[Static/5] 00:00:06

gt;to 172.16.1.2 via ge-0/0/2.0 192.168.51.0/24 *[Static/5] 00:00:06

gt;to 172.16.1.2 via ge-0/0/2.0

user@routergt; show configuration policy-options policy-statement demo {

term 1 { from {

protocol aggregate;

route-filter 192.168.0.0/16 longer;

}

then accept;

}

}

user@routergt; show configuration protocols ospf export demo;

area 0.0.0.0 { interface ge-0/0/2.0;

}

Exhibit

Given the configuration and routing table shown in the exhibit, which routes will be advertised to OSPF neighbors because of the demo policy?

A. 192.168.0.0/16 only

B. 192.168.0.0/17 only

C. 192.168.0.0/16 and 192.168.0.0/17

D. 192.168.0.0/17, 192.168.50.0/24, and 192.168.51.0/24

Correct Answer: B

Question No.302

A packet is evaluated against three user-defined terms within a firewall filter and no match is found. What correctly describes the action the firewall filter will take for this packet?

  1. The filter will permit the packet and take no additional action.

  2. The filter will reject the packet and send an ICMP message back to the sender.

  3. The filter will discard the packet and take no additional action.

  4. The filter will permit the packet and write a log entry to the firewall log.

Correct Answer: C

Question No.303

What represents the binary equivalence of 207?

A.

11001111

B.

11101011

C.

11010111

D.

11010101

Correct Answer: A

Question No.304

What are two purposes of a forwarding class? (Choose two.)

  1. to identify traffic that should be dropped

  2. to classify traffic

  3. to identify traffic that should receive common treatment

  4. to assign traffic to output queues

Correct Answer: CD

Question No.305

Which command do you use as a valid way to view the PICs within a router as well as the PICs#39; serial numbers?

  1. show chassis hardware

  2. show chassis interfaces

  3. show chassis pic

  4. show chassis inventory

Correct Answer: A

Question No.306

You have been allocated a /22 network. How many usable hosts are available? A. 510

B.

512

C.

1022

D.

1024

Correct Answer: C

Question No.307

Which two can be used to create and apply an export policy that advertises static routes to RIP neighbors? (Choose two.)

  1. set protocols rip export demo

  2. edit policy-options policy-statement demo set term 1 from protocol static

    set term 1 then accept

  3. edit policy-options policy-statement demo set term 1 from protocol static accept

  4. set protocols rip group internal export demo

Correct Answer: BD

Question No.308

Which CLI command do you use to determine which files are cleanup candidates?

  1. request system storage cleanup candidates

  2. request system services storage candidates

  3. request system services candidate cleanup

  4. request system storage cleanup dry-run

Correct Answer: D

Question No.309

Exhibit

user@router# run show interfaces terse Interface Admin Link Proto Local

fe-0/0/0 up up

fe-0/0/0.0 up upinet 10.0.39.2/24 iso

mpls

fe-0/0/1 up up

fe-0/0/1.0 up upinet 10.0.18.2/24

fe-0/0/1.5 down up inet 10.0.19.2/24

Exhibit

An administrator is unable to ping any address on the 10.0.19.0/24 subnet. To identify the problem, the administrator uses the command shown in the exhibit.

Which step should be taken to solve the problem?

  1. Check the physical cable.

  2. Issue the command activate interfaces fe-0/0/1.5 .

  3. Issue the command delete interfaces fe-0/0/1.5 disable.

  4. Reconfigure the IP address.

Correct Answer: C

Question No.310

What are two valid match criteria for a routing policy? (Choose two.)

  1. OSPF area ID

  2. prefix list

  3. port

  4. time-to-live (TTL)

Correct Answer: AB

Get Full Version of the Exam
JN0-102 Dumps
JN0-102 VCE and PDF