[Free] 2019(Nov) EnsurePass Cisco 500-230 Dumps with VCE and PDF 1-10

Get Full Version of the Exam
http://www.EnsurePass.com/500-230.html

Question No.1

Which command is required to permit the retention of BGP Prefixes on a router with VRFs not importing the associated Route Target?

  1. route-policy PASS-ALL in

  2. retain route-target all

  3. import route-target policy all

  4. import route-target all

Correct Answer: B

Question No.2

How are labels exchanged between the AS#39;es in an Option B Layer-3 VPN solution?

  1. Via an eBGP multihop connection between the Ingress PE#39;s in each AS.

  2. Via an eBGP multihop connection between a Route-Reflector in each AS.

  3. There are no labels exchanged between the two AS#39;es.

  4. Via an eBGP connection between the directly connected ASBR#39;s, one in each AS.

Correct Answer: D

Question No.3

What command is used to manually generate a core dump to aid in troubleshooting a process?

  1. context

  2. dumpcore

  3. exception

  4. follow

Correct Answer: C

Question No.4

Which mode will shut down a process?

  1. EXEC

  2. ADMIN

  3. CONFIG

  4. ADMIN-CONFIG

Correct Answer: C

Question No.5

What is currently required for eBGP sessions in IOS-XR that was not required in IOS?

  1. Default MED values

  2. Local-Preference values

  3. Send Communities

  4. Route-Filter In and Out

Correct Answer: D

Question No.6

How many times are Layer 3 lookups performed on a packet transiting a CRS or ASR9k router?

  1. Three times: in the ingress linecard, the fabric, and the egress linecard

  2. Once: in the active RP/RSP

  3. Once: in the ingress linecard

  4. Twice: in the ingress linecard and again in the egress linecard

Correct Answer: A

Question No.7

Which is required on the CE router in an L3VPN solution?

  1. Configure the PE-CE Routing protocol

  2. Define the VPN by creating a VRF

  3. Assign the PE facing interface to a VRF

  4. Configure MPLS forwarding on the interface to the PE router

Correct Answer: A

Question No.8

What is the default MP-BGP address-family on IOS-XR?

  1. IPv6 unicast

  2. There is no default address-family

  3. IPv4 unicast

  4. VPNv4

Correct Answer: D

Question No.9

Which command is run to make changes permanent and survive a reload after executing the command quot;copy disk0:config-file.txt running-configquot;?

  1. Commit Confirm

  2. Commit Copy

  3. Command not require, changes are committed automatically

  4. Commit

Correct Answer: D

Question No.10

What BGP address-families are used between the ASBRs in the different AS#39;es in an IPv4 Option C Layer-3 VPN solution?

  1. VPNv4 Unicast Only

  2. IPv4 Umcast and VPNv4 Unicast

  3. IPv4 Labeled-Unicast only

  4. IPv4 Unicast and IPv4 Labeled-Unicast

Correct Answer: D

>

Get Full Version of the Exam
500-230 Dumps
500-230 VCE and PDF