[Free] 2019(Nov) EnsurePass Cisco 300-175 Dumps with VCE and PDF 91-100

Get Full Version of the Exam
http://www.EnsurePass.com/300-175.html

Question No.91

Your systems engineer has determined all of the firmware versions that the server operating system supports. What steps are taken on Cisco UCS to avoid manual firmware upgrades on the blade servers?

  1. Use Cisco UCS Manager firmware management to upgrade all Cisco UCS blade servers to the

    same target firmware versions.

  2. Configure host firmware package and management firmware package policies and associate the firmware policies with the service profiles.

  3. Create a BIOS policy and define the host firmware package and management firmware package.

  4. Configure host firmware package and management firmware package policies and associate the firmware policies with the server pools.

Correct Answer: B

Question No.92

What is true statement concerning port personalities on the Cisco Unified Computing System 62XX Fabric Interconnect?

  1. Fibre Channel uplink ports must operate in Fibre Channel switching mode.

  2. The fabric interconnects use native FCoE storage ports to directly attach to the SAN infrastructure.

  3. By default, all Fibre Channel ports are unconfigured.

  4. The Fibre Channel uplink ports do not support VSAN trunking and Fibre Channel port channels.

  5. The Fibre Channel storage ports support VSAN trunking and Fibre Channel port channels.

Correct Answer: C

Question No.93

If there are four I/O module links from the Cisco Unified Computing System 5108 Blade Chassis to the Cisco Unified Computing System 6248UP Fabric Interconnect, which dynamic vNICs can be defined?

A.

9

B.

16

C.

24

D.

48

E.

54

F.

112

Correct Answer: E

Question No.94

In a standalone Cisco UCS C-Series server, which recommendations can be used to upgrade the BIOS?

  1. Cisco IMC

  2. Cisco UCS Manager

  3. iFlash32 Utility

  4. Flash ROM Utility

  5. EFI Interface

  6. Cisco Host Upgrade Utility

  7. USB Flash Utility

Correct Answer: F

Question No.95

When upgrading a standalone Cisco UCS C-Series server, which method is correct?

  1. direct upgrade on all components

  2. Cisco Hardware Upgrade Utility

  3. Cisco Host Upgrade Utility

  4. Cisco Server Upgrade Utility

Correct Answer: C

Question No.96

If a customer wants to maximize the capability of server mobility with the Cisco UCS deployment, what two options are Cisco recommended? (Choose two.)

  1. Configure a server inheritance policy.

  2. Configure a Virtual Media boot.

  3. Configure a hardware-based service profile with burned-in addresses and identities.

  4. Configure boot from SAN.

  5. Configure service profiles with resource pools.

Correct Answer: DE

Question No.97

Which two options occur when a server discovery policy is invoked? (Choose two.)

  1. executes the qualification in the server discovery policy against the server

  2. applies the scrub policy to the server

  3. analyzes the inventory of the server

  4. assigns the server to the selected organization, if configured

  5. creates a service profile for the server with the identity burned into the server at time of manufacture

Correct Answer: AB

Question No.98

How does a Cisco Unified Computing System react when configured for disjoint Layer 2 domains?

  1. Automatic pinning is disabled; VLAN membership must be statically pinned to the uplink ports.

  2. VLANs must be divided between the fabric interconnects using PIN groups.

  3. The VLAN traffic for a disjoint network can only travel along an uplink that is specifically assigned to this VLAN and is selectively excluded from all other uplinks.

  4. When you configure disjoint Layer 2 networks, you must assign VLANs to uplink interfaces.

Correct Answer: C

Question No.99

Which two are true with respect to the upgrade process for the Cisco Unified Computing System? (Choose two.)

  1. For easier manageability, Cisco provides one full bundle that contains the firmware images for all Cisco Unified Computing System components.

  2. You can choose from FTP, TFTP, SCP, and HTTP to copy the bundle image from a remote file system.

  3. When the bundle image is downloaded, it must be transferred to the flash file system of the active fabric interconnect.

  4. When the download is successful, Cisco Unified Computing System Manager expands the individual files from the archive and installs them in the correct flash file system partition.

  5. It is strongly recommended that you activate all components in all chassis at one time.

  6. The I/O module, CIMC, and adaptors update process operates strictly on the backup partition of Flash for a given component.

Correct Answer: CF

Question No.100

How many certificates does Cisco Unified Computing System Manager have to export to communicate with VMware vCenter server if the VMware ESXi hosts are all running version 5.0 or higher?

A.

1

B.

2

C.

4

D.

8

E.

16

Correct Answer: A

Get Full Version of the Exam
300-175 Dumps
300-175 VCE and PDF