[Free] 2019(Nov) EnsurePass Cisco 300-175 Dumps with VCE and PDF 71-80

Get Full Version of the Exam
http://www.EnsurePass.com/300-175.html

Question No.71

Which option describes the possible result of a customer configuring a server pool that contains Cisco UCS B200 M2 and B250 M2 blades?

  1. A service profile cannot migrate automatically from one blade to another blade within the server pool due to hardware failure.

  2. You must decommission a blade server for the associated service profile to migrate to another blade in the server pool successfully.

  3. You must uncheck the Restrict Migration box in the service profile to allow service profile migration between blades in the server pool.

  4. After service profile migration, the server fails in boot from SAN due to differences in PCI device IDs.

Correct Answer: D

Question No.72

What is a true statement concerning automatic Fibre Channel pinning on a Cisco Unified Computing System 62XX Fabric Interconnect?

  1. By default, uplink Fibre Channel interfaces are configured for VSAN trunking.

  2. Using NPV, each downstream server will be pinned to an uplink port that is based on a PIN group.

  3. The Fibre Channel pinning process is implemented differently than end-host MAC address pinning.

  4. With VSAN trunking, the automatic pinning of server traffic to Fibre Channel uplink ports will be based on the server WWN.

Correct Answer: D

Question No.73

Which two items can you provision in a vHBA Template? (Choose two.)

  1. Max Data Field Size

  2. SCSI I/O Queues

  3. FCoE VLAN

  4. vHBA Interrupt Mode

  5. Stats Threshold Policy

  6. FLOGI Timeout

Correct Answer: AE

Question No.74

Which options are valid port types when configuring fixed 10-Gb LAN interfaces on the Cisco UCS 6200 Series Fabric Interconnects? (Choose three.)

  1. monitoring port

  2. server port

  3. uplink Ethernet port

  4. FEX port

  5. Fibre Channel storage port

Correct Answer: ABC

Question No.75

The Cisco UCS administrator has the chassis discovery policy set to quot;2-linkquot;. The administrator connects a new chassis to the Cisco UCS 6200 Series Fabric Interconnects using four links.

Which option about link utilization is true?

  1. The Cisco UCS will use two links until the chassis is reacknowledged, after which it will use all four links.

  2. The Cisco UCS will use all four links for discovery.

  3. The Cisco UCS will use only two links. The other two links are unusable.

  4. The Cisco UCS will use only two links. However, the administrator can manually pin traffic to the extra links by using service profiles.

Correct Answer: A

Question No.76

In the Create Dynamic vNIC Connection Policy dialog box, there is a configurable field titled Protection. What is the significance of the three choices for Protection?

  1. allows reserve vNICs to be allocated out of the spares pool

  2. enables hardware-based failover

  3. enables static binding of the VM port profile to dynamic vNICs

  4. selects the primary fabric association for dynamic vNICs

  5. allows dynamic vNICs to be reserved for fabric failover

Correct Answer: D

Question No.77

Which three statements about default settings for fabric interconnect uplink ports are true? (Choose three.)

  1. When a VLAN is configured, it is trunked on all uplinks.

  2. Specific VLANs are trunked on specific uplinks.

  3. UDLD is enabled.

  4. UDLD is disabled.

  5. Cisco Discovery Protocol is enabled.

  6. Cisco Discovery Protocol is disabled.

  7. They connect to the I/O modules.

Correct Answer: ADE

Question No.78

Which ports can access the Cisco IMC if you select Shared LOM NIC mode in the Cisco IMC Configuration Utility for a Cisco UCS C-Series server?

  1. the ports on an installed Cisco network adapter card

  2. the two 1-Gb Ethernet ports

  3. the two 10/100 management ports

  4. the two 10/100 management ports, but each port has a default setting

    Correct Answer: B

    Question No.79

    How many links are there between a second-generation IOM (Cisco UCS 2204 or 2208) and a third-generation half-width blade (Cisco UCS B200 M3 or B22 M3) in a Cisco UCS system?

    A.

    1

    B.

    2

    C.

    4

    D.

    8

    Correct Answer: C

    Question No.80

    When implementing a Cisco UCS C-series standalone server, which of the following Cisco Integrated Management Controller NIC modes allow use of the least number of physical ports while providing maximum levels of redundancy?

    1. dedicated

    2. shared LOM

    3. shared LOM 10G

    4. Cisco VIC

Correct Answer: D

Get Full Version of the Exam
300-175 Dumps
300-175 VCE and PDF