[Free] 2019(Nov) EnsurePass Cisco 300-070 Dumps with VCE and PDF 51-60

Get Full Version of the Exam
http://www.EnsurePass.com/300-070.html

Question No.51

You are performing route pattern configuration. You need to ensure that internal extensions are automatically expanded to full external phone numbers for calling line information on outgoing calls. What should you use?

  1. calling extension expansion

  2. called number expansion

  3. external number mask of the called party

  4. external phone number mask of the calling party

Correct Answer: D

Question No.52

Which statement best describes Urgent Priority operations in relation to call routing in Cisco Unified Communications Manager?

  1. An Urgent Priority operation is initiated whenever an IP phone user presses the # key for immediate dialing.

  2. An Urgent Priority operation can be configured on a route pattern to force immediate routing when a first match is detected, even if there are longer route patterns that are also potential matches.

  3. Urgent Priority operations are automatically performed in translation patterns and emergency route patterns in order to force immediate routing when a first match is detected, even if there are longer route patterns that are also potential matches.

  4. Urgent Priority operations cannot be used for VoIP route patterns; they are only applicable to PSTN route patterns.

Correct Answer: B

Explanation:

The Urgent Priority check box is often used to force immediate routing of certain calls as soon as a match is detected, without waiting for the T302 timer to expire when additional longer potential matches exist.

Question No.53

Which three options are types of media resources in CUCM? (Choose three)

  1. Music on hold

  2. H.323 trunk

  3. Media Termination Point

  4. Meet-Me Conference

  5. SIP trunk

  6. Transcoder

Correct Answer: ACF

Question No.54

The CSS on a line includes the partitions 911, internal and local. The CSS on the device includes the partitions 911, internal, local and long distance. Which CSS will be used if the phone user dials a local number?

  1. The device CSS will be used since the device CSS is always used first on an IP phone.

  2. Since the dialed digits are a match to a partition is in both Calling Search Spaces the call will use both matched partitions in both Calling Search Spaces in a round-robin format.

  3. If there is both a line and device CSS the line device will only be used.

  4. The line and device CSSs will be combined and the device CSS will take precedence.

  5. The line and device CSSs will be combined and the line CSS will take precedence.

Correct Answer: E

Question No.55

To verify that proper digit manipulation is being applied when using called party transformation patterns, which Cisco IOS command do you use from the router or voice gateway?

  1. show voice ccapi inout

  2. debug voice ccapi in

  3. show voice ccapi

  4. show voice ccapi in

  5. debug voice ccapi inout

  6. debug voice ccapi out

  7. show voice ccapi out

Correct Answer: E

Explanation:

http://www.netcraftsmen.com/called-party-transformation-patterns-example-andvalidation/

Question No.56

A Cisco Unified Communications Manager group specifies a prioritized list of how many Cisco Unified Communications Managers?

  1. 0

  2. 1

  3. 2

  4. 3

  5. 4

  6. 5

  7. 6

  8. 7

Correct Answer: D

Question No.57

What is the best tool to test end verify a dial plan during the implementing phase?

  1. Translator X

  2. CUCM Dialed Number Analyzer.

  3. Real-Time Monitoring Tool.

  4. Cisco Prime Collaboration Tool.

Correct Answer: B

Question No.58

Where is a Local Route Group configuration applied?

  1. In each IP phone

  2. In each device pool

  3. In each location

  4. In each region

  5. In each route list

Correct Answer: B

Question No.59

Which configuration output indicates a properly configured T1 digital voice interface?

  1. controller T1 0/0/0framing esflinecode b8zspri-group timeslots 1-24!

  2. isdn switch-type primary-ni!controller T1 0/0/0framing esflinecode b8zs!

  3. isdn switch-type primary-ni!controller T1 0/0/0framing esflinecode b8zspri-group timeslots 1- 24isdn switch-type primary-ni!

  4. isdn switch-type primary-ni!controller T1 0/0/0framing esflinecode b8zs!dial-peer voice 1 potsdestination-pattern 54….direction-inward.dialport 0/0/0:23

Correct Answer: C

Question No.60

What is the correct order for configuring call routing in Cisco Unified Communications Manager?

  1. gateway and SIP trunk, route group, route pattern, route list

  2. gateway and SIP trunk, route list, route group, route pattern

  3. gateway and SIP trunk, route group, route list, route pattern

  4. route list, gateway and SIP trunk, route group, route pattern

Correct Answer: C

Get Full Version of the Exam
300-070 Dumps
300-070 VCE and PDF

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.