[Free] 2017(Aug) EnsurePass Examcollection Microsoft 70-741 Dumps with VCE and PDF 21-30

EnsurePass
2017 Aug Microsoft Official New Released 70-741
100% Free Download! 100% Pass Guaranteed!
http://www.EnsurePass.com/70-741.html

Networking with Windows Server 2016

Question No: 21

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.

The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.

The domain contains three servers configured as shown in the following table.

image

Client computers obtain TCP/IP settings from Server3.

You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.

Server1 has four DNS zones configured as shown in the following table.

image

You need to ensure that when a computer is removed from the network, the associated records are deleted automatically after 15 days.

Which two actions should you perform? Each correct answer presents part of the solution.

  1. Create a scheduled task that runs the Remove-Computer cmdlet.

  2. Modify the Zone Aging/Scavenging Properties of the zone.

  3. Modify the Time to live (TTL) value of the start of authority (SOA) record.

  4. Set the Scavenging period of Server1.

  5. Modify the Expires after value of the start of authority (SOA) record.

Answer: B,D Explanation:

https://technet.microsoft.com/en-us/library/cc771362(v=ws.10).aspx

Question No: 22

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a DHCP server named Server1 that has three network cards. Each network card is configured to use a static IP address.

You need to prevent all client computers that have physical address beginning with 98-5F from leasing an IP address from Server1.

What should you do?

  1. From the properties of Scope1, modify the Conflict detection attempts setting.

  2. From the properties of Scope1, configure Name Protection.

  3. From the properties of IPv4, configure the bindings.

  4. From IPv4, create a new filter.

  5. From the properties of Scope1, create an exclusion range.

  6. From IPv4, run the DHCP Policy Configuration Wizard.

  7. From Control Panel, modify the properties of Ethernet.

  8. From Scope1, create a reservation.

Answer: E Explanation:

https://technet.microsoft.com/en-us/library/ee941125(v=ws.10).aspx

Question No: 23 DRAG DROP

You have an internal network that contains multiple subnets.

You have a Microsoft Azure subscription that contains multiple virtual networks.

You need to deploy a hybrid routing solution between the network and the Azure subscription. The solution must ensure that the computers on all of the networks can

connect to each other.

You install RAS Gateway and enable BGP routing on the network and in Azure.

Which three actions should you perform next in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

image

Answer:

image

Explanation:

image

https://docs.microsoft.com/en-us/azure/vpn-gateway/vpn-gateway-bgp-resource-manager- ps#enablebgp

Question No: 24

You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2016. Server1 and Server2 are connected to the same network.

On Server1 and Server2, you create an external network switch named Switch1. You have the virtual machine shown in the following table.

image

All three virtual machines are connected to Switch1.

You need to prevent applications in VM3 from being able to capture network traffic from VM1 or VM2. The solution must ensure that VM1 retains network connectivity.

What should you do?

  1. Configure network virtualization for VM1 and VM2.

  2. Modify the subnet mask of VM1 and VM2.

  3. On Server2, configure the VLAN ID setting of Switch1.

  4. On Server2, create an external switch and connect VM3 to the switch.

Answer: A Explanation:

https://blogs.technet.microsoft.com/networking/2016/10/26/network-virtualization-with- ws2016-sdn/

Question No: 25

Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.

You have a DHCP server named Server1 that has an IPv4 scope named Scope1.

Users report that when they turn on their client computers, it takes a long time to access the network.

You validate that it takes a long time for the computers to receive an IP address from Server1.

You monitor the network traffic and discover that Server1 issues five ping commands on the network before leasing an IP address.

You need to reduce the amount of time it takes for the computers to receive an IP address. What should you do?

  1. From the properties of Scope1, modify the Conflict detection attempts setting.

  2. From the properties of Scope1, configure Name Protection.

  3. From the properties of IPv4, configure the bindings.

  4. From IPv4, create a new filter.

  5. From the properties of Scope1, create an exclusion range.

  6. From IPv4, run the DHCP Policy Configuration Wizard.

  7. From Control Panel, modify the properties of Ethernet.

  8. From Scope1, create a reservation.

Answer: A Explanation:

https://technet.microsoft.com/en-us/library/ee941125(v=ws.10).aspx

Question No: 26

You have a server named Server1 that runs Windows Server 2016 and is configured as a domain controller.

You install the DNS Server server role on Server1.

You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone.

What should you use?

  1. Set-DnsServer

  2. Active Directory Sites and Services

  3. Dns.exe

  4. Dnscmd.exe

Answer: D Explanation:

https://technet.microsoft.com/en-us/library/ee649181(v=ws.10).aspx

Question No: 27

Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.

The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.

The domain contains three servers configured as shown in the following table.

image

Client computers obtain TCP/IP settings from Server3.

You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.

Server1 has four DNS zones configured as shown in the following table.

image

You need to ensure that when a record is added dynamically to fabrikam.com, only the computer that created the record can modify the record. The solution must allow administrators to modify all of the records in fabrikam.com.

What should you do?

  1. Change fabrikam.com to an Active Directory-integrated zone.

  2. Raise the functional level of the domain.

  3. Modify the security settings of the Fabrikam.com.dns file.

  4. Modify the Start of Authority (SOA) settings of fabrikam.com

Answer: A Explanation:

https://technet.microsoft.com/en-us/library/cc753751(v=ws.11).aspx

Question No: 28

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2016 and has the

DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.

All client computers dynamically register their names in the contoso.com DNS zone on Server1.

You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.

You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.

Solution: You set the Time to live (TTL) value of all of the records in the zone. Does this meet the goal?

  1. Yes

  2. No

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/cc958972.aspx

Question No: 29

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.

After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.

Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.

You open the DHCP console as shown in the exhibit. (Click the Exhibit button.)

image

You need to ensure that all of the Windows 10 computers can receive a DHCP lease. Solution: You activate the scope.

Does this meet the goal?

  1. Yes

  2. No

Answer: A Explanation:

https://technet.microsoft.com/en-us/library/dd183581(v=ws.10).aspx

Question No: 30

You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.

You need to ensure that the traffic is distributed evenly among the virtual machines that host App1.

What should you include in the environment?

  1. Network Controller and Windows Server Network Load Balancing (NLB) nodes

  2. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes

  3. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes

  4. Network Controller and Windows Server Software Load Balancing (SLB) nodes

Answer: B Explanation:

https://technet.microsoft.com/en-us/library/mt403307(v=ws.11).aspx#bkmk_slb

100% Free Download!
Download Free Demo:70-741 Demo PDF
100% Pass Guaranteed!
Download 2017 EnsurePass 70-741 Full Exam PDF and VCE
Get 10% off your purchase! Copy it:TJDN-947R-9CCD [2017.07.01-2017.07.31]

EnsurePass ExamCollection Testking
Lowest Price Guarantee Yes No No
Up-to-Dated Yes No No
Real Questions Yes No No
Explanation Yes No No
PDF VCE Yes No No
Free VCE Simulator Yes No No
Instant Download Yes No No

2017 EnsurePass IT Certification PDF and VCE