Download New Updated (Spring 2015) Microsoft 70-687 Actual Tests 71-80

Ensurepass

 

QUESTION 71

A portable computer that runs Windows 8.1 uses a mobile broadband connection for the corporate wireless network.

 

The computer also ha a wired corporate network connection. The computer successfully downloads Windows updates when connected to either network.

 

You need to ensure that the computer automatically downloads updates by using Windows Update while also connected to the wireless corporate network connection.

 

What should you do?

 

A.

Set the corporate wireless network to metered.

B.

Set the corporate wireless network to non-metered.

C.

Configure the Specify intranet Microsoft update service location local Group Policy setting.

D.

Configure a Windows Firewall connection security rule.

 

Answer: B

Explanation:

Setting a Wireless network to METERED allows only critical Windows Updates using that connection.

Setting a Wireless network to NON-METERED allows all Windows Updates using that connection.

Source: http://windows.microsoft.com/en-US/windows-8/metered-internet-connections- frequently-askedquestions.

http://windows.microsoft.com/en-US/windows-8/metered-internet-connections-frequently- asked-questions

Metered Internet connections: FAQ

 

What’s a metered Internet connection?

Internet service providers can charge by the amount of data used (the amount of data sent and received by your PC). That’s called a metered Internet connection. These plans often have a data limit, and if you exceed the limit you might have to pay extra. In some cases, you aren’t charged extra but your connection speed becomes slower until the billing cycle ends.

If you have a metered Internet connection, setting your network connection to metered in Windows can help you reduce the amount of data you send and receive.

 

How does setting my network connection to metered affect my PC? Any app that relies on an Internet connection to update or display info might be limited in the amount of data it can download or display. You might notice these and other effects:

Windows Update will only download priority updates.

 

Further Information:

Setting a Wireless network to METERED allows only critical Windows Updates using that connection.

Setting a Wireless network to NON-METERED allows all Windows Updates using that connection.

 

 

QUESTION 72

A company has client computers that run Windows 8.1. Each computer has two hard drives.

 

You need to create a dynamic volume on each computer that maximizes write performance with data fault tolerance.

 

Which kind of dynamic volume should you create?

 

A.

Striped Volume

B.

RAID 5 Volume

C.

Spanned Volume

D.

Mirrored Volume

 

Answer: D

Explanation:

http://technet.microsoft.com/en-us/library/cc737048%28v=ws.10%29.aspx

Types of Dynamic Volumes

 

A dynamic volume is a volume that is created on a dynamic disk. Dynamic volume types include simple, spanned, and striped volumes.

 

Mirrored Volumes

A mirrored volume is a fault-tolerant volume that provides a copy of a volume on another disk. Mirrored volumes provide data redundancy by duplicating the information contained on the volume. The two disks that make up a mirrored volume are known as mirrors. Each mirror is always located on a different disk. If one of the disks fails, the data on the failed disk becomes unavailable, but the system continues to operate by using the unaffected disk.

Mirrored volumes are typically created by the user who requires fault-tolerance and who has two disks in their computer. If one disk fails, the user always has a copy of their data on the second disk. Mirrored volumes provide better write performance than RAID-5 volumes.

 

Further Information:

 

Striped Volumes

Striped volumes improve disk input/output (I/O) performance by distributing I/O requests across disks. Striped volumes are composed of stripes of data of equal size written across each disk in the volume. They are created from equally sized, unallocated areas on two or more disks.

Striped volumes cannot be extended or mirrored and do not offer fault tolerance. If one of the disks containing a striped volume fails, the entire volume fails, and all data on the striped volume becomes inaccessible. The reliability for the striped volume is less than the least reliable disk in the set.

 

RAID-5 Volumes

A RAID-5 volume is a fault-tolerant volume that stripes data and parity across three or more disks. Parity is a calculated value that is used to reconstruct data if one disk fails. RAID-5 volumes are typically created by the user who requires fault-tolerance and who has at least three disks in their computer. If one of the disks in the RAID-5 volume fails, the data on the remaining disks, along with the parity information, can be used to recover the lost data. RAID-5 volumes are well-suited to storing data that will need to be read frequently but written to less frequently. Database applications that read randomly work well with the built-in load balancing of a RAID-5 volume.

Spanned Volumes

Spanned volumes combine areas of unallocated space from multiple disks into one logical volume. The areas of unallocated space can be different sizes. Spanned volumes require two disks, and you can use up to 32 disks.

 

 

QUESTION 73

A company has client computers that run Windows 8.1.

 

The company implements the following security requirements:

 

All client computers must use two-factor authentication.

At least one authentication method must include more than four characters or gestures.

 

You need to choose authentication methods that comply with the security requirements.

 

Which two authentication methods should you choose? (Each correct answer presents part of the solution. Choose two.)

 

A.

PIN

B.

Biometric authentication

C.

Picture Password

D.

Microsoft Account

 

Answer: BD

Explanation:

More than 4 characters are of course supported with the Microsoft Account.

It is something the user knows. The picture password would be another thing the user knows (gestures).

So there’s only MS Account and Biometric authentication left. Two-factor authentication requires the use of two of the three authentication factors:

Something the user knows (e.g., password, PIN);

Something the user has (physical Object) (e.g., ATM card, smart card); and Something the user is (e.g., biometric characteristic, such as a fingerprint). The factors are identified in the standards and regulations for access to U.S. Federal Government systems.

 

http://en.wikipedia.org/wiki/Multi-factor_authentication

Multi-factor authentication

 

Two-factor authentication requires the use of two of the three authentication factors. The factors are identified in the standards and regulations for access to U.S. Federal Government systems. These factors are:

Something only the user knows (e.g., password, PIN, pattern); Something only the user has (e.g., ATM card, smart card, mobile phone); and Something only the user is (e.g., biometric characteristic, such as a fingerprint).

 

1. Something the user knows: Microsoft Account

Minimum password length is more than 4 characters.

 

2. Something only the user is: Biometric authentication

http://john.bryntze.net/jbkb-v2/certification-exam-70-687-configuring-windows-8-part-4- configure-access-to-resources-14/

Biometric in Windows 8 is built on Windows Biometric Framework and relies on Windows Biometric service that is set to start up manual by default.

 

clip_image001

 

Further information:

Something the user knows: Picture password

Problem: limited to 3 gestures

 

clip_image003

 

Something the user knows:

http://john.bryntze.net/jbkb-v2/certification-exam-70-687-configuring-windows-8-part-4-configure-access-to-resources-14/

Sign in with PIN code (4-digit code) is not possible for a domain user, it is not even visible in PC Settings -> Users (if machine is not domain joined you see it). To enable it for even domain joined computer/users you can enable the policy Turn on PIN sign-in and it becomes visible.

 

clip_image004

 

 

QUESTION 74

All client computers in a company’s network environment run Windows 8.1. A client computer has two internal hard disk drives. The hard drives are configured as shown in the following table.

 

clip_image005

 

You are choosing a backup destination for drive C.

 

You have the following requirements:

 

Ensure that the backup file is available if drive C fails.

Ensure that the backup file can be accessed by other computers on the network.

Support the backup of multiple system images.

 

You need to select a backup destination that meets the requirements.

 

Which destination should you select?

 

A.

shared network folder

B.

drive D

C.

multiple DVDs

D.

external hard drive

 

Answer: D

Explanation:

Shared network folder will only support one system image:

 

clip_image007

 

That applies to internal / external disks:

 

clip_image009

 

http://windows.microsoft.com/en-us/windows7/Back-up-your-programs-system-settings-and-files

 

Keeping different versions of system images:

If you’re saving your system images on an internal or external drive, or on CDs or DVDs, you can keep several versions of system images.

On internal and external hard drives, older system images will be deleted when the drive runs out of space. Conclusion is to use external HDD and share it over the network.

 

http://technet.microsoft.com/en-us/library/cc737048%28v=ws.10%29.aspx

What Are Dynamic Disks and Volumes?

 

Like basic disks, which are the most commonly used storage type found on computers running Microsoft Windows, dynamic disks can use the master boot record (MBR) or GUID partition table (GPT) partitioning scheme. All volumes on dynamic disks are known as dynamic volumes. Dynamic disks were first introduced with Windows 2000 and provide

 

features that basic disks do not, such as the ability to create volumes that span multiple disks (spanned and striped volumes), and the ability to create fault tolerant volumes (mirrored and RAID-5 volumes).

 

http://lifehacker.com/5958865/how-to-use-windows-8s-new-file-history-backup-aka-time- machine-for-windows

How to Use Windows 8’s New File History Backup (aka Time Machine for Windows)

 

The Difference Between File History and Windows Backup Windows Backup still exists in Windows 8, it’s just been renamed to “Windows 7 File Recovery.” So, if you want to back up your files, you have the choice of which system you want to use.

Windows Backup (now called “Windows 7 File Recovery”) backs up your computer on a schedule you set–for example, once a week on Sunday at 2am (though the default is once a month). You can choose to back up whatever you want, from a small selection of personal files to program files to anything else. You can even create a full system image, which is handy when you want to restore your computer to exactly the way it was at a certain point in time. To restore files, you had to go into it’s slightly confusing interface and find the files you were looking for in a set of folders on your backup drive.

 

 

QUESTION 75

You are in the process of setting up File History on your workstation.

 

You are configuring the Size of offline cache Advanced settings.

 

Which of the following is the default setting?

 

A.

2%

B.

5%

C.

10%

D.

20%

 

Answer: B

Explanation:

http://news.softpedia.com/news/Windows-8-Secrets-Incremental-Backup-with-File-History- 299238.shtml

 

clip_image011

QUESTION 76

You are in the process of setting up File History on your workstation.

 

You are configuring the Save copies of files Advanced settings.

 

Which of the following is the default setting?

 

A.

15 minutes

B.

30 minutes

C.

1 hour

D.

6 hours

 

Answer: C

 

 

QUESTION 77  

You are employed as an administrator at contoso.com.

 

The network consists of a single Active Directory Domain Services (AD DS) domain, named contoso.com.

 

All workstations on the contoso.com network have Windows 8.1 installed.

 

You need to configure files history on a client system.

 

You notice that the free storage space on the selected drive is low, but you do not have a spare drive to replace it.

 

What should you do?

 

A.

Configure the save copies of files setting to back up files once a day.

B.

Configure Size of offline cache setting to 2%

C.

Keep saved versions setting to be 1 month

D.

Keep saved versions setting until space is needed

 

Answer: D

 

 

QUESTION 78

You are employed as an administrator at contoso.com. The contoso.com network is made up of an Active Directory Domain Services (AD DS) domain, named ABC.com.

 

All workstations on the contoso.com network, including laptops, have Windows 8.1 installed.

 

Your users have just been issued new laptops for use outside the office.

 

These users currently log in to their desktop workstations using a Windows domain account.

 

They would like their laptops to be set up exactly like their desktop workstations.

 

Which of the following would easily allow them to achieve this?

 

A.

Transfer the user settings with the File and Transfer wizard

B.

Windows Easy Transfer

C.

Migrate the user profiles with USMT

D.

Link the Windows domain accounts to a Windows Live ID.

 

Answer: D

Explanation:

http://blogs.msdn.com/b/b8/archive/2011/09/26/signing-in-to-windows-8-with-a-windows-live-id.aspx

 

Signing in with an ID allows you to:

Associate the most commonly used Windows settings with your user account. Saved settings are available when you sign in to your account on any Windows 8.1 PC. Your PC will be set up just the way you are used to!

Easily reacquire your Metro style apps on multiple Windows 8.1 PCs. The app’s settings and last-used state Persist across all your Windows 8.1 PCs. Save sign-in credentials for the different apps and websites you use and easily get back into them without having to enter credentials every time.

 

Automatically sign in to apps and services that use Windows Live ID for authentication. http://windows.microsoft.com/en-us/windows-8/connect-microsoft-domain-account

Connect your Microsoft account to your domain account

 

You can connect your Microsoft account to your domain account and sync your settings and preferences between them. For example, if you use a domain account in the workplace, you can connect your Microsoft account to it and see the same desktop background, app settings, browser history and favorites, and other Microsoft account settings that you see on your home PC. You’ll also be able to use Microsoft account services from your domain PC without signing in to them individually.

 

 

QUESTION 79

A company has 50 touch-enabled client computers that run Windows 7.

 

You are planning to migrate the client computers to Windows 8.1. You have the following requirements:

 

Choose the installation or upgrade path that includes touch-optimized desktop versions of Microsoft Word, Excel, PowerPoint, and OneNote.

Minimize new hardware requirements.

 

You need to choose the path that meets the requirements.

 

Which path should you choose?

 

A.

Upgrade to Windows RT

B.

Perform a clean installation of Windows 8.1 Enterprise

C.

Purchase hardware with Windows RT pre-installed.

D.

Upgrade to Windows 8.1 Enterprise.

 

Answer: D

Explanation:

Windows RT is Windows for ARM; nothing in this specifies the computers are on ARM machines.

 

http://blogs.office.com/2012/07/18/using-the-new-office-with-touch/

Windows 8 provides a number of platform capabilities for enabling highly responsive touch support in applications, ranging from hardware accelerated graphics and improved touch targeting to the a new app platform that makes it easy to build touch-optimized Windows 8-style apps. The new Office takes advantage of these to deliver great new touch-based experiences on Windows 8.

 

http://www.howtogeek.com/120936/beginner-how-to-enable-touch-mode-in-office-2013/ Beginner: How to Enable Touch Mode in Office 2013

 

By default, even if you are on a touch enabled PC, Office 2013 doesn’t open with a touch optimized interface.

 

clip_image013

 

Further Information:

Windows RT is Windows for ARM; nothing in this specifies the computers are on ARM machines.

 

 

QUESTION 80

A company has 100 client computers that run Windows Vista. The company uses several custom applications.

 

The company plans to replace the Windows Vista computers with new computers that run Windows 8.1.

 

You need to establish which of the currently installed applications will work on Windows 8.1.

 

What should you do?

 

A.

Install and run the Windows App Certification Kit.

B.

Install and run the Microsoft Assessment and Planning Toolkit.

C.

Install and run the Microsoft Deployment Toolkit.

D.

Install and run the Windows Application Compatibility Toolkit.

 

Answer: B

Explanation:

http://technet.microsoft.com/en-us/solutionaccelerators/dd537566.aspx

http://www.microsoft.com/en-us/download/details.aspx?id=30652

Windows Assessment and Deployment Kit (ADK) for Windows ® 8

 

The Windows® Assessment and Deployment Kit (Windows ADK) is a collection of tools that you can use to customize, assess, and deploy Windows operating systems to new computers.

 

Features available in the Windows ADK include:

 

Application Compatibility Toolkit (ACT) – The Application Compatibility Toolkit (ACT) helps IT Professionals understand potential application compatibility issues by identifying which applications are or are not compatible with the new versions of the Windows operating system. ACT helps to lower costs for application compatibility evaluation by providing an accurate inventory of the applications in your organization. ACT helps you to deploy Windows more quickly by helping to prioritize, test, and detect compatibility issues with your apps

 

Supported Operating System

To install the Windows ADK, your computer must be running one of the following operating systems:

Windows® 8

Windows® 7

Windows Server® 2012

Windows Server® 2008 R2

Windows Vista®

Windows Server® 2008

 

Further Information:

http://www.microsoft.com/en-us/download/details.aspx?id=7826

Microsoft Assessment and Planning Toolkit

 

The Microsoft Assessment and Planning Toolkit makes it easy to assess your current IT infrastructure for a variety of technology migration projects. This Solution Accelerator provides a powerful inventory, assessment, and reporting tool to simplify the migration planning process.

 

Supported Operating System

Windows 7 Service Pack 1

Windows 8

Windows 8.1

Windows Server 2008 R2 SP1

Windows Server 2012

Windows Server 2012 R2

 

http://www.microsoft.com/en-us/download/details.aspx?id=25175

Microsoft Deployment Toolkit (MDT) 2012 Update 1

 

Microsoft Deployment Toolkit (MDT) 2012 Update 1 is the newest version of MDT, a Solution Accelerator for operating system and application deployment. MDT 2012 Update 1 supports deployment of Windows 8, Windows 7, Office 2010 and 365, Windows Server 2012, and Windows Server 2008 R2 in addition to deployment of Windows Vista, Windows Server 2008, Windows Server 2003, and Windows XP.

 

MDT 2012 Update 1 relies on several Windows deployment tools. After installation of the .msi package and startup of the Deployment Workbench, the user can choose to download and install the following major tools from the Components:

Windows 8 Assessment and Deployment Kit

 

Free VCE & PDF File for Microsoft 70-687 Real Exam

Instant Access to Free VCE Files: MCSE|MCSA|MCITP…
Instant Access to Free PDF Files: MCSE|MCSA|MCITP…