Download New Updated (Spring 2015) Microsoft 70-687 Actual Tests 151-160

Ensurepass

 

QUESTION 151

You use a Windows 8.1 computer. You pin some of your favorite websites to the Start screen.

 

When you click a pinned website, the site opens in Internet Explorer.

 

You need to ensure that the pinned websites open in Internet Explorer for the desktop.

 

What should you do?

 

A.

In Internet Options, set Choose how you open links to Always in Internet Explorer on the desktop.

B.

In Internet Options, select Open Internet Explorer tiles on the desktop.

C.

In Internet Options, select Enable flip ahead.

D.

In Internet Options, set Choose how you open links to Let Internet Explorer decide.

 

Answer: B

Explanation:

http://blogs.msdn.com/b/ie/archive/2012/03/26/launch-options-for-internet-explorer-10-on- windows-8.aspx

Launch Options for Internet Explorer 10 on Windows 8

 

Opening Internet Explorer from the Start Screen

In addition to controlling how Windows opens links, the Browser Launch Settings also provide users with options on how Internet Explorer application tiles launch from the Start screen. Internet Explorer’s application tile is the default launching point for the browser on the Start screen. You create pinned site tiles when you pin sites to the Start screen. The setting “Open Internet Explorer tiles on the desktop” controls what happens when you click the Internet Explorer or pinned site tile.

 

clip_image001

 

QUESTION 152

You administer Windows 8.1 Enterprise client computers in your company network.

 

You change settings on a reference computer by using the Windows Firewall with Advanced Security tool. You want to apply the same settings to other computers.

 

You need to save the windows Firewall with Advanced Security configuration settings from the reference computer. You also need to be able to import the configuration settings into a Group Policy object later.

 

What should you do?

 

A.

Open Local Group Policy Editor, select the Local Policies node, and then select the Export List action.

B.

Open Local Group Policy Editor, select the Security Settings node, and then select the Export List action.

C.

Run the netshadvfirewall export c:settings.wfw command.

D.

Run the netshadvfirewall export c:settings.xml command.

 

Answer: C

Explanation:

* Netshadvfirewall is a command-line tool for Windows Firewall with Advanced Security that helps with the creation, administration, and monitoring of Windows Firewall and IPsec settings and provides an alternative to console-based management. T

* Export subcommand

Exports the Windows Firewall with Advanced Security configuration in the current store to a file. This file can be used with the import command to restore the Windows Firewall with Advanced Security service configuration to a store on the same or to a different computer.

 

Syntax

export [ Path ] FileName

 

Parameters

[ Path ] FileName

Required. Specifies, by name, the file where the Windows Firewall with Advanced Security configuration will be written. If the path, file name, or both contain spaces, quotation marks must be used. If you do not specify Path then the command places the file in your current folder. The recommended file name extension is .wfw.

 

Example

In the following example, the command exports the complete Windows Firewall with Advanced Security service configuration to the file C:tempwfas.wfw.

export c:tempwfas.wfw

 

Reference: Netsh Commands for Windows Firewall with Advanced Security

 

 

 

 

 

 

 

 

 

 

QUESTION 153

HOTSPOT

You are troubleshooting communication issues on a computer that has Windows 8.1 Enterprise installed.

 

The relevant portion of the computer configuration is displayed in the exhibit. (Click the Exhibit button.)

 

clip_image003

 

You need to find the Windows Firewall service startup and shutdown events.

 

In the Event Viewer, which event log should you select? (To answer, select the appropriate log in the answer area.)

 

clip_image005

 

Answer:

clip_image007

 

QUESTION 154

DRAG DROP

You are preparing to deploy a new computer that runs Windows 8.1. You plan to copy the user’s data from his current computer to the new computer.

 

You need to generate a list of data that will be copied from his existing computer to the new computer.

 

Which three actions should you perform in sequence? (To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.)

 

clip_image009

 

Answer:

clip_image011

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

QUESTION 155

A company is setting up a new branch office. You deploy 10 new Windows 8.1 64-bit client computers in the branch office.

 

The computers cannot connect to the Internet. You run the ipconfig command on one computer. The following output depicts a portion of the results.

 

clip_image012

 

You need to ensure that the computers can connect to the Internet.

 

What should you do?

 

A.

Deploy a Dynamic Host Configuration Protocol (DHCP) server. Configure all computers to use DHCP.

B.

Deploy an Internet Information Services (IIS) server. Configure all computers to use IIS.

C.

Deploy a Domain Name System (DNS) server. Configure all computers to use DNS.

D.

Deploy a Windows Internet Name Service (WINS) server. Configure all computers to use WINS.

 

Answer: A

Explanation:

http://packetlife.net/blog/2008/sep/24/169-254-0-0-addresses-explained/

169.254.0.0/16 addresses explained

 

Occasionally you may encounter a host which has somehow assigned itself an IP address in the 169.254.0.0/16 range. This is a particularly common symptom of Windows machines which have been configured for DHCP but for whatever reason are unable to contact a DHCP server. When a host fails to dynamically acquire an address, it can optionally assign itself a link-local IPv4 address in accordance with RFC 3927. Microsoft’s term for this is Automatic Private Internet Protocol Addressing (APIPA).

 

 

QUESTION 156

A company has an Active Directory Domain Services (AD DS) domain. All client computers are joined to the domain and run Window 8.1. You set up a management computer named COMPUTER1.

 

You plan to administer COMPUTER1 by using Windows Remote Shell (WinRS) from your client computer.

 

You are unable to connect to COMPUTER1 by running the winrs command.

 

You need to ensure that you can manage only COMPUTER1 by using WinRS.

 

What should you do?

 

A.

Run the winrsnetdom join command on all client computers.

B.

Run the winrsnetdom join command only on COMPUTER1.

C.

Run the winrmquickconfig command on all client computers.

D.

Run the winrmquickconfig command only on COMPUTER1.

E.

Run the winrs /ad /u:administrator command on COMPUTER1.

 

Answer: D

Explanation:

http://clintboessen.blogspot.com/2010/01/what-is-winrm.html

What is WinRM?

 

The easiest way to start the WinRM server unless you want to do custom configuration is by using the “winrm quickconfig” command.

 

clip_image013

 

Hit “Y” to make the change. Next it asks you if you want to allow it to make a HTTP listener and create a windows firewall exception.

 

clip_image014

 

Hit “Y” to make the change. WinRM is now running and can be remotely managed by WinRS (the WinRM client).

 

clip_image015

 

Now re-run the “winrm enumerate winrm/config/listener” command to see if WinRM is working:

 

clip_image016

 

We see it listening on port 5985, this is because I’m running Windows 7 on this PC so its using WinRM 2.0.

 

Now from another PC I can use the WinRS client to remotely execute commands against that workstation/server by using “winrs -r:https://myserver.com” command. Please note that you need to run the command as a user in the remote computers “Administrators” group. By default WinRS will use your active windows credentials. However I do not run my computer as administrator for security purposes so I will need to specify a user account with Domain Admins rights to ensure I have correct access by using the -u: switch.

http://msdn.microsoft.com/en-us/library/aa384372%28v=vs.85%29.aspx

Installation and Configuration for Windows Remote Management

 

The winrm quickconfig command (or the abbreviated version winrm qc) performs the following operations:

Starts the WinRM service, and sets the service startup type to auto-start. Configures a listener for the ports that send and receive WS-Management protocol messages using either HTTP or HTTPS on any IP address. Defines ICF exceptions for the WinRM service, and opens the ports for HTTP and HTTPS.

 

Note: The winrm quickconfig command creates a firewall exception only for the current user profile. If the firewall profile is changed for any reason, winrm quickconfig should be run to enable the firewall exception for the new profile; otherwise, the exception might not be enabled.

 

 

QUESTION 157

You administer Windows 8.1 client computers in your company network.

 

A user reports that her Internet connection is slower than usual.

 

You need to identify the Process Identifiers (PIDs) of applications that are making connections to the Internet.

 

Which command should you run?

 

A.

netstat -an

B.

jpconfig /showclassid

C.

netstat -o

D.

netsh set audit-logging

E.

netsh show netdlls

 

Answer: C

Explanation:

http://technet.microsoft.com/en-us/library/bb490947.aspx

 

Netstat

Displays active TCP connections, ports on which the computer is listening, Ethernet statistics, the IP routing table, IPv4 statistics (for the IP, ICMP, TCP, and UDP protocols), and IPv6 statistics (for the IPv6, ICMPv6, TCP over IPv6, and UDP over IPv6 protocols). Used without parameters, netstat displays active TCP connections.

 

Syntax

netstat [-a] [-e] [-n] [-o] [-p Protocol] [-r] [-s] [Interval]

 

Parameters a : Displays all active TCP connections and the TCP and UDP ports on which the computer is listening. n : Displays active TCP connections, however, addresses and port numbers are expressed numerically and no attempt is made to determine names. -o : Displays active TCP connections and includes the process ID (PID) for each connection. You can find the application based on the PID on the Processes tab in Windows Task Manager. This parameter can be combined with -a, -n, and -p.

 

Further Information:

netstat -an – there is no “an” parameter

 

http://technet.microsoft.com/en-us/library/cc940124.aspx

Ipconfig

 

/showclassid < adapter >

Displays all the DHCP class IDs allowed for the adapter specified.

 

http://technet.microsoft.com/sv-se/library/cc785383%28v=ws.10%29.aspx

The Netsh Command-Line Utility

 

set audit-logging

Turns on or off the logging facility.

show netdlls

Displays the current version of installed Netsh helper DLLs.

 

 

QUESTION 158

You administer Windows 8.1 computers in your company network.

 

You need to configure remote computers to receive Windows Remote Shell commands.

 

Which cmdlet should you run on the remote computers?

 

A.

Enable-PSRemoting

B.

Set-PSSessionConfiguration

C.

New-PSSession

D.

Set-NetConnectionProfile

 

Answer: A

Explanation:

The Enable-PSRemotingcmdlet configures the computer to receive Windows PowerShell remote commands that are sent by using the WS-Management technology. http://technet.microsoft.com/en-us/library/hh849694.aspx

Enable-PSRemoting

 

The Enable-PSRemoting cmdlet configures the computer to receive Windows PowerShell remote commands that are sent by using the WS-Management technology.

 

On Windows Server?2012, Windows PowerShell remoting is enabled by default. You can use Enable-PSRemoting to enable Windows PowerShell remoting on other supported versions of Windows and to re-enable remoting on Windows Server 2012 if it becomes disabled.

 

You need to run this command only once on each computer that will receive commands. You do not need to run it on computers that only send commands. Because the configuration activates listeners, it is prudent to run it only where it is needed.

 

Further Information:

http://technet.microsoft.com/en-us/library/hh849726.aspx

Set-PSSessionConfiguration

 

The Set-PSSessionConfiguration cmdlet changes the properties of the session configurations on the local computer.

 

http://technet.microsoft.com/en-us/library/hh849717.aspx

New-PSSession

 

The New-PSSession cmdlet creates a Windows PowerShell session (PSSession) on a local or remote computer. When you create a PSSession, Windows PowerShell establishes a persistent connection to the remote computer.

 

http://technet.microsoft.com/en-us/library/jj899565.aspx

Set-NetConnectionProfile

 

The Set-NetConnectionProfile cmdlet changes the network category setting of a connection profile. A connection profile represents a network connection.

 

 

QUESTION 159

You administer Windows 8.1 Pro computers in your company network.

 

A user reports that her computer experiences frequent STOP errors.

 

You need to repair the Windows 8.1 installation. Your solution must ensure that the user retains her current documents and settings.

 

What should you do?

 

A.

Create a recovery drive.

B.

Reinstall Windows 8.1. Restore the user’s personal files from a backup.

C.

Run Reset your PC.

D.

Run Refresh your PC.

 

Answer: D

Explanation:

http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc

 

How to refresh, reset, or restore your PC

If you’re having problems with your PC, you can try to refresh, reset, or restore it. Refreshing your PC reinstalls Windows and keeps your personal files and settings. It also keeps the apps that came with your PC and the apps you installed from the Windows Store. Resetting your PC reinstalls Windows but deletes your files, settings, and apps — except for the apps that came with your PC. Restoring your PC is a way to undo recent system changes you’ve made.

 

 

QUESTION 160

You administer a Windows 8.1 Pro client computer. You disable system protection, install custom drivers, and create a system image.

 

You test a new application and discover that the computer becomes unresponsive.

 

You need to return your computer to the state that existed prior to the installation of the application.

 

What should you do?

 

A.

Start the computer from a system recovery drive, and then perform System Restore.

B.

Start the computer from a system repair disk, and then perform System Image Recovery.

C.

Start the computer from the system repair disk, and then from the command prompt, run the BCDEdit /copy command.

D.

Run Reset your PC.

 

Answer: B

Explanation:

If you can’t access Control Panel and you don’t have a Windows installation disc or a system repair disc, use this method to restore your computer:

Restart your computer using the computer’s power button.

Do one of the following:

On the Advanced Boot Options screen, use the arrow keys to highlight Repair your computer, and then press Enter.

Select a keyboard layout, and then click Next.

Select a user name, type the password, and then click OK.

On the System Recovery Options menu, click System Image Recovery, and then follow the instructions.

 

Free VCE & PDF File for Microsoft 70-687 Real Exam

Instant Access to Free VCE Files: MCSE|MCSA|MCITP…
Instant Access to Free PDF Files: MCSE|MCSA|MCITP…