Achieve New Updated (September) Microsoft 70-410 Examination Questions 361-370

Ensurepass

 

QUESTION 361

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 R2 installed.

ENSUREPASS.com has a server, named ENSUREPASS-SR13, which is configured as the primary DNS server in the ENSUREPASS.com domain. ENSUREPASS.com has another server, named ENSUREPASS-SR14, which makes use of ENSUREPASSSR13 for DNS queries.

You want to make sure that running nslookup.exe from ENSUREPASS-SR14 produces a result that shows the proper name of the default server.

Which of the following actions should you take?

 

A.

You should consider creating a reverse lookup zone on ENSUREPASS-SR14.

B.

You should consider creating a forward lookup zone on ENSUREPASS-SR14.

C.

You should consider creating a reverse lookup zone on ENSUREPASS-SR13.

D.

You should consider creating a forward lookup zone on ENSUREPASS-SR13.

 

Correct Answer: C

Explanation:

When you start Nslookup from a command line, the following error message may be displayed: DNS request timed out

timeout was x seconds

Can’t find server name for address xxx.xxx.xxx.xxx: Timed out

Default servers are not available

Default Server: UnKnown

Address: xxx.xxx.xxx.xxx

where xxx.xxx.xxx.xxx is the Internet Protocol (IP) address of the host on which you are attempting to start Nslookup.

CAUSE When Nslookup starts, it attempts to resolve the IP address of its host’s DNS server to its fully qualified domain name (FQDN). If the DNS server does not respond or if the DNS server’s reverse lookup zones do not contain a PTR record for the DNS server’s IP address, the error message is displayed.

http://support.microsoft.com/kb/242906/en-us

 

 

QUESTION 362

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 R2 installed. ENSUREPASS.com has a server, named ENSUREPASS-SR07, which has the ADDS, DHCP, and DNS server roles installed. ENSUREPASS.com also has a server, named ENSUREPASS-SR08, which has the DHCP, and Remote Access server roles installed. You have configured a server, which has the File and Storage Services server role installed, to automatically acquire an IP address. The server is named ENSUREPASSSR09.

You then create reservation on ENSUREPASS-SR07, and a filter on ENSUREPASS-SR08.

Which of the following is a reason for this configuration?

 

A.

It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR08 only.

B.

It configures ENSUREPASS-SR09 with a static IP address.

C.

It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR07 and

ENSUREPASSSR08.

D.

It allows ENSUREPASS-SR09 to acquire a constant IP address from ENSUREPASS-SR07 only.

 

Correct Answer: D

Explanation:

To configure the Deny filter

In the DHCP console tree of DHCP Server 1, under IPv4, click Filters, right-click Deny under Filters, and then click New Filter. In the New Deny Filter dialog box, in MAC Address, enter a six hexadecimal number representing the MAC or physical address of DHCP Client 2, click Add, and then click Close. Under Filters right-click the Deny node, and then click the Enable pop-up menu item.

http://technet.microsoft.com/en-us/library/ee405265%28WS.10%29.aspx

 

 

QUESTION 363

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com.

ENSUREPASS.com has a server, named ENSUREPASS-SR15, which has Windows Server 2012 R2 installed. ENSUREPASS.com also has a server, named ENSUREPASS-SR16, which has Windows Server 2008 R2 SP1 installed.

You have been instructed to make sure that ENSUREPASS-SR16 is able to run Windows PowerShell 3.0.

Which of the following actions should you take? (Choose two.)

 

A.

You should consider making sure that ENSUREPASS-SR16 has a full installation of Microsoft .NET

Framework 4 installed.

B.

You should consider making sure that ENSUREPASS-SR16 has a full installation of Microsoft .NET

Framework 2 installed.

C.

You should consider making sure that ENSUREPASS-SR16 has WS-Management 3.0 installed.

D.

You should consider making sure that ENSUREPASS-SR16 is upgraded to Windows Server 2012 R2.

 

Correct Answer: AC

Explanation:

WS-Management 3.0 – Windows Management Framework 3.0 Includes Windows PowerShell 3.0, WMI, WinRM, Management OData IIS Extension, and Server Manager CIM Provider

Windows Management Framework 3.0 requires Microsoft .NET Framework 4.0.

http://www.microsoft.com/en-us/download/details.aspx?id=34595

 

 

QUESTION 364

You work as an administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 R2 installed.

ENSUREPASS.com has a server, named ENSUREPASS-SR13. ENSUREPASS-SR13 hosts a shared folder, named ENSUREPASSShare, which has been shared as ENSUREPASSShare$.

Which of the following is TRUE with regards to sharing the folder in this manner?

 

A.

It allows all users to view ENSUREPASSShare when browsing the network.

B.

It prevents users from viewing ENSUREPASSShare when browsing the network.

C.

It only allows ENSUREPASS-SR13’s users to view ENSUREPASSShare.

D.

It removes the permissions configured for ENSUREPASSShare.

 

Correct Answer: B

Explanation:

A hidden share is identified by a dollar sign ($) at the end of the share nameHidden shares are not listed when you look through the shares on a computer or use the “net view” command

Why Use Hidden Shares?

Using hidden shares on your network is useful if you do not want a shared folder or drive on the network to be easily accessible. Hidden shares can add another layer of protection for shared files against unauthorized people connecting to your network. Using hidden shares helps eliminate the chance for people to guess your password (or be logged into an authorized Windows account) and then receive access to the shared resource.

 

clip_image001

 

http://support.microsoft.com/kb/314984

http://technet.microsoft.com/en-us/library/cc784710(v=ws.10).aspx

 

 

QUESTION 365

You work as a senior administrator at ENSUREPASS.com. The ENSUREPASS.com network consists of a single domain named ENSUREPASS.com. All servers on the ENSUREPASS.com network have Windows Server 2012 R2 installed.

You are running a training exercise for junior administrators. You are currently discussing printer pooling.

Which of the following is TRUE with regards to printer pooling? (Choose all that apply.)

 

A.

Printers in a pool must be of the same model, and use the same printer driver.

B.

Each printer in the pool must have a different printer driver.

C.

Printer ports used in the pool must be of the same type.

D.

The types of printer ports used in the pool must be mixed.

E.

Pooled printers appear to workstations as a single printer.

F.

A minimum of three printers are required to configure a printer pool.

 

Correct Answer: AE

Explanation:

You can create a printing pool to automatically distribute print jobs to the next available printer. A printing pool is one logical printer connected to multiple printers through multiple ports of the print server. The printer that is idle receives the next document sent to the logical printer. This is useful in a network with a high volume of printing because it decreases the time users wait for their documents. A printing pool also simplifies administration because multiple printers can be managed from the samelogical printer on a server.

http://technet.microsoft.com/en-us/library/cc757086%28v=ws.10%29.aspx

 

 

QUESTION 366

You work as an administrator at ABC.com. The ABC.com network consists of a single domain named ABC.com. All servers in the ABC.com domain, including domain controllers, have Windows Server 2012 R2 installed.

You have installed the DNS Server Role on a ABC.com server, named ABC-SR13. ABC.com’s workstations make use of a web proxy to access the Internet, and refer to ABC-SR13 as a primary DNS server.

You have been instructed to make sure that Internet host names for ABC.com’s workstations are not resolved by ABC-SR13.

Which of the following actions should you take?

 

A.

You should consider configuring a primary zone on ENSUREPASS-SR13.

B.

You should consider configuring a secondary zone on ENSUREPASS-SR13.

C.

You should consider configuring a reverse lookup zone on ENSUREPASS-SR13.

D.

You should consider configuring a forward lookup zone on ENSUREPASS-SR13.

 

Correct Answer: A

Explanation:

Open DNS Server Manager | Expand DNS Server | Expand Forward Lookup Zones | Right Click on Forward Lookup Zones and select New Zone | Primary Zone | Zone Name: “.” (only dot, without quotation marks) When you create such a zone, you are configuring the DNS server to be the ultimate authority for the DNS namespace. The DNS server will no longer attempt to forward any DNS requests that it is not authoritative for.

When you install DNS on a Windows server that does not have a connection to the Internet, the zone for the domain is created and a root zone, also known as a dot zone, is also created. This root zone may prevent access to the Internet for DNS and for clients of the DNS. If there is a root zone, there are no other zones other than those that are listed with DNS, and you cannot configure forwarders or roothint servers.

Root domain This is the top of the tree, representing an unnamed level; it is sometimes shown as two empty quotation marks (“”), indicating a null value. When used in a DNS domain name, it is stated by a trailing period (.) to designate that the name is located at the root or highest level of the domain hierarchy. In this instance, the DNS domain name is considered to be complete and points to an exact location in the tree of names. Names stated this way are called fully qualified domain names (FQDNs).

 

clip_image002

 

http://technet.microsoft.com/en-us/library/cc772774%28v=ws.10%29.aspx http://youtu.be/KjMDtlR6Mhk http://support.microsoft.com/kb/298148/en-us

http://www.wincert.net/tips/windows-server/2510-how-to-remove-root-hints-in-windows-server-2008-r2- dns-server http://support.microsoft.com/kb/298148/en-us

 

 

QUESTION 367

You run a Windows Server 2012 R2, what is the PowerShell command to set preferred dns server. Note: Other config such as ip address should not be changed.

 

A.

Register-DnsClient

B.

Set-DnsClient

C.

Set-DnsPreferredClientServerAddress

D.

Set-DnsClientServerAddress

 

Correct Answer: D

Explanation:

Set-DnsClientServerAddress – Sets DNS server addresses associated with the TCP/IP properties on an interface.

Set-DnsClientServerAddress -InterfaceIndex 12 -ServerAddresses (“10.0.0.1”)

 

clip_image003

 

There is a fair bit of confusion around the purpose of the Alternate DNS Server. This Post should hopefully put these questions to bed.

The general assumption is that, the Windows DNS Client on all counts, will send a DNS query to the Preferred DNS first. If this query fails, then it will query the Alternate DNS Server, and so on and so forth.

The above statement is true, however there is a twist.

The Windows DNS Client will reset the DNS Server Priority at periodic intervals. By default, the server priorities are reset every 15 minutes.

Let’s look at an example:

I have a DNS Client configured as follows:

Preferred DNS: 192.168.0.1

Alternate DNS: 10.10.0.1

The DNS Client will start by sending queries to 192.168.0.1. After 15 minutes it will switch priority to 10.10.0.1. Thus all queries will first be sent to 10.10.0.1 for a period of 15 minutes before switching back to 192.168.0.1

There is another condition that triggers a Priority Switch.

If say the Preferred DNS timed out on a DNS query, the DNS Client will send that DNS Query to the Alternate DNS.

If the Alternate DNS resolves the Query, the Priority will now switch to the Alternate DNS, until either it times out on a Query or the Priority Time Limit expires.

It is a common practice to configure the Preferred DNS Server w
ith the IP of a Local Site DNS Server and the Alternate DNS Server with that of a Remote Site. The problem arises when Firewall/Network folk raise complaints that Clients are sending DNS Traffic to Remote DNS Servers. Well, that is because they have been configured to do so.

http://blogs.technet.com/b/ajayr/archive/2011/12/14/who-does-dns-client-prefer-preferred-or-alternate.aspx

http://technet.microsoft.com/en-us/library/cc738344%28v=ws.10%29.aspx http://technet.microsoft.com/en-us/library/jj590768.aspx

 

 

QUESTION 368

Command to set configure network interface primary dns server. Note: Other config such as ip address should not be changed.

 

clip_image004

 

A.

set-ipaddress

B.

netsh

C.

ipconfig

D.

winipconfig

 

Correct Answer: B

Explanation:

netsh interface ipv4 set dns name=”Local Area Connection” source=static address

=192.168.100.49 primary

http://exchangeserverpro.com/how-to-add-multiple-dns-servers-to-windows-server-2008-core/

 

 

 

 

 

QUESTION 369

A company’s server deployment team needs to install fourteen Windows Server 2012 R2 to handle the expected increase in holiday traffic. The team would like the option of switching the servers between Server Core and Full GUI servers and do not want to be locked in to their first choice.< /p>

The server team would like four of the servers to include the Windows 8 Shell. Which installation option is required for these servers?

 

A.

Server Core

B.

Desktop Experience

C.

Server with a GUI

D.

Minimal Server Interface

 

Correct Answer: B

Explanation:

The Desktop Experience installation option includes the Windows 8 Shell feature. This installation option also includes other features available for installation not found in the other three; such as Themes, Windows Store and support for Windows Store apps, and Windows Media Player.

Quick Tip: To completely remove a feature and the binary files from the disk, use the Windows PowerShell command Uninstall-WindowsFeature. For example, to remove Desktop Experience:

Uninstall-WindowsFeature Desktop-Experience -Remove

http://technet.microsoft.com/en-us/library/hh831786.aspx

http://mcpmag.com/articles/2013/01/22/70-410-win2012-install.aspx

 

 

QUESTION 370

A company’s network administrator needs to ensure a specific IP address is never assigned by a Windows Server 2012 R2 DHCP server to any device connecting to the network.

Which of the following should the administrator configure on the Windows Server 2012 R2 DHCP server?

 

A.

Reservation

B.

Scope options

C.

NAP

D.

Scope properties

 

Correct Answer: A

Explanation:

Configuring an IP address as a reservation will restrict a DHCP server’s assignment of that address unless a specific MAC address makes a request for the address.

Exclusion is for not use the IP Address or range inside the Scope Pool, Filter is for not use theMAC Address or range.

Quick Tip: Policies can also be defined per scope or server. Policy based assignment (PBA) allows an administrator to group DHCP clients by specific attributes based on fields contained in the DHCP client request packet. This feature allows for targeted administration and greater control of configuration parameters delivered to network devices.

http://technet.microsoft.com/en-us/library/jj200226.aspx

http://mcpmag.com/articles/2013/02/12/70-410-dhcp.aspx

Another correct answer? Create a Exclusion Range? You decide… but that option is not at the options list at this question.

 

clip_image006

Free VCE & PDF File for Microsoft 70-410 Real Exam

Instant Access to Free VCE Files: MCSE|MCSA|MCITP…
Instant Access to Free PDF Files: MCSE|MCSA|MCITP…