2019 Free Microsoft EnsurePass 200-150 Dumps VCE and PDF Download Part 1
EnsurePass
Exam Dumps
200-150 Dumps VCE and PDF
2019 200-150 Dumps VCE and PDF
QUESTION 1
Which three addresses are valid forms of an IPv6 Address: 2001:0DB8:0000:FE01:0000:0000:0000:0000? (Choose three.)
A. |
2001:0DB8:0000:FE01:: |
B. |
2001:DB8:0:FE01:: |
C. |
2001:0DB8::FE01:: |
D. |
2001:DB8:0:FE01:0:0:0:0 |
Correct Answer: ABD
QUESTION 2
Which VTP mode disallows the creation of local VLANs?
A. |
transparent |
B. |
tunneling |
C. |
server |
D. |
client |
E. |
off |
F. |
native |
Correct Answer: D
Explanation:
“A VTP client behaves like a VTP server and transmits and receives VTP updates on its trunks, but you cannot create, change, or delete VLANs on a VTP client. VLANs are configured on another switch in the domain that is in server mode.”
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/configuration/guide/swvtp.html#wp1205076
QUESTION 3
On a Cisco router, which configuration register setting bypasses the contents of the NVRAM?
A. |
0x102 |
B. |
0x2102 |
C. |
0x2120 |
D. |
0x2124 |
E. |
0x2142 |
Correct Answer: E
QUESTION 4
For witch reason would you implement a VSAN?
A. |
to overcome the limitation of zoing |
B. |
to virtualize storage |
C. |
to segment the physical fabric into multiple logical fabrics |
D. |
to overcome the limitations of LUN masking |
Correct Answer: C
QUESTION 5
Which Cisco UCS power policy mode enables a configuration that can tolerate the loss of an input power circuit?
A. |
nonredundatnt |
B. |
Grid |
C. |
N+1 in normal mode |
D. |
N+1 in high-density mode |
Correct Answer: B
Explanation:
Grid Redundant (N+N) – below: The purpose of the grid redundant mode is to enable a configuration that can tolerate the loss of either a power supply or a input power circuit. In grid-redundant mode the system can withstand the loss of any two power supplies. The Figure 5 shows the required wiringScheme for Grid Redundant power where N=2.
QUESTION 6
Refer to the exhibit. Which host can securely to the switch by using SSH?
A. |
10.1.15 |
B. |
10.200.200.1 |
C. |
10.2.1.1 |
D. |
10.9.1.2 |
Correct Answer: A
QUESTION 7
Which two descriptions of a Fabricpath network are true? (Choose two.)
A. |
A leaf node connects to servers. |
B. |
Leaf nodes can be Layer 3 devices. |
C. |
A spine node connects to other switch in the fabric. |
D. |
There is a spanning tree protocol running between leaf and spine switches |
E. |
A spine node connects to servers. |
Correct Answer: BD
QUESTION 8
Which two networking devices forward data based on destination MAC address? (Choose two.)
A. |
Repeater |
B. |
Bridge |
C. |
Switch |
D. |
Router |
E. |
Hub |
Correct Answer: BC
Explanation:
http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/white_paper_c11-465436.html
QUESTION 9
What happens when there is no entry in the Layer 2 CAM table that corresponds to the destination MAC address of an incoming frame?
A. |
The frame is flooded out of all forwarding ports in all VLANs. |
B. |
The frame is flooded out of all forwarding ports in its VLAN, except the port on which it is received. |
C. |
The switch drops the frame. |
D. |
The frame is flooded out of all forwarding ports in its VLAN, including the port on which it is received. |
Correct Answer: B
QUESTION 10
Which two of the following statements are true with respect to STP in this network? (Choose 2)
A. |
Both 5k’s have BPDU Guard and BPDU Filter enabled by default, while both 7k’s do not |
B. |
Both 5k’s bridge Assurance enabled, while both 7k’s do not |
C. |
7k’s is the root bridge for VLANs 100-150 |
D. |
Both 7K-3 and 7k-4 being vPC peers, are the root bridge for VLANs 100-150 |
E. |
No devices have a root cost higher than 1, since all devices are no more that 1 hop away from each other |
Correct Answer: BE